MANEK MACHINES - plastic injection moulding machine

Injecta - Horizontal Hydraulic Plastic Injection Moulding Machines	Vertical Hydraulic, Semi-Automatic Plastic Injection Moulding Machine, Plunger Type	Vertical Plastic Injection Moulding Machines
PLASJET - Horizontal Fully Automatic Plastic Injection Moulding Machines with Direct Drive Screw	AUTOMIC - Mechanical Type Semi-automatic Vertical Plastic Injection Moulding Machines

INJECTA - Horizontal Hydraulic Plastic Injection Moulding Machines

Semi Automatic Plunger Type MODEL: IN-60, IN-75	Fully Automatic Plunger Type MODEL: IN-100, IN-125
Fully Automatic Screw Type MODEL: IN-100S, IN-125S

Horizontal Hydraulic, Semi and Fully Automatic Plastic Injection Moulding Machines, Plunger Type

Specifications:

MODEL:	IN - 60	IN - 75	IN - 100	IN - 125
Max. Moulding Capacity* (gms.):	60	75	100	125
Max. Injection Pressure (kg / cm2) / (psi):	1000 / 15000	1000 / 15000	1000 / 15000	1000 / 15000
Max. Plasticising Capacity* Semi Automatic (kg / hr):	7.20	9.00	10.00	10.00
Max. Plasticising Capacity* Fully Automatic (kg / hr):	10.80	12.00	13.00	13.75
Max. Shots per Hour* Semi Automatic (nos / hr):	120	120	100	80
Max. Shots per Hour* Fully Automatic (nos / hr):	180	160	130	110
Max. dimensions of mould L x B x H (mm):	245 x 250 x 250	270 x 250 x 270	290 x 300 x 300	290 x 300 x 300
Max. Mould Opening (mm):	225	250	300	320
Number of Tie Bars (nos.):	2	2	4	4
Clear Gap between Tie Bars (mm):	275	300	320 x 145	320 x 145
Centre Height of Injection Nozzle (mm):	175	190	225	225
Clamping Force (tons):	30	35	60	80
Max. Pump Pressure (adjustable) (kg / cm2):	140	140	140	140
Oil Tank Capacity (liters):	100	115	150	150
Electric Motor (HP):	7.5	10	12.5	12.5
Total Heating Load (kW):	1.5	1.75	3.0	4.0
Approximate Machine Dimensions (mm):	2300 x 600 x 1400	2500 x 600 x 1400	2800 x 750 x 1600	3000 x 750 x 1600
Approximate Net / Gross Weight (Kgs.):	1000 / 1300	1300 / 1500	2500 / 2800	2600 / 3000
Approximate Shipping Volume (m3):	2.85	3.10	4.70	5.00

Horizontal Hydraulic, Fully Automatic Plastic Injection Moulding Machines, Screw Type

Specifications:

MODEL:	IN - 60S	IN - 75S	IN - 100S	IN - 125S
Screw Diameter (mm):	30	30	35	35
Max. Moulding Capacity* (gms.):	60	75	100	125
Max. Injection Pressure (kg / cm2):	1100	1200	1800	1800
Max. Plasticising Capacity* (kg / hr):	14.4	18	18	22.5
Max. Shots per Hour* (nos / hr):	240	240	180	180
Dry Cycles per Hour:	400	400	350	350
Max. Swept Volume (cm3):	77	90	120	140
Max. dimensions of mould L x B x H (mm):	245 x 250 x 250	270 x 250 x 270	290 x 300 x 300	290 x 300 x 300
Max. Mould Opening (mm):	225	250	300	320
Number of Tie Bars (nos.):	2	2	4	4
Clear Gap between Tie Bars (mm):	275	300	320 x 145	320 x 145
Centre Height of Injection Nozzle (mm):	175	190	225	225
Clamping Force (tons):	30	35	60	80
Max. Pump Pressure (adjustable) (kg / cm2):	140	140	140	140
Oil Tank Capacity (liters):	100	115	175	200
Electric Motor (HP):	7.5	10	12.5	12.5
Total Heating Load (kW):	1.5	1.75	2.5	3.2
Approximate Machine Dimensions (mm):	2300 x 600 x 1400	2500 x 600 x 1400	2800 x 750 x 1600	3000 x 750 x 1600
Approximate Net / Gross Weight (Kgs.):	1200 / 1500	1500 / 1700	2700 / 3000	2800 / 3200
Approximate Shipping Volume (m3):	2.85	3.10	4.70	5.00

Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes, acrylics, ABS, flexible PVC, rigid PVC (in Screw Type machines only), etc. Extra optional Nozzles available for moulding Nylon, Polyester, etc.

* - Depends on material, processing conditions, individual articles, mould design, etc.

VIDEO OF IN-75S INJECTION MOULDING MACHINE

VIDEO OF IN-100 INJECTION MOULDING MACHINE

Vertical Hydraulic, Semi-Automatic Plastic Injection Moulding Machine, Plunger Type

Model: 40HM

Specifications:

Model:	40HM
Max. Moulding Capacity (gms.):	40
Stroke of Injection Plunger (mm):	150
Injection Pressure - adjustable (kg / cm2):	1200
Clamping Force - adjustable (tons):	up to 4
Clamping Stroke (mm):	125
Working Base Width (mm):	175
Distance - back to barrel nozzle (mm):	80
Distance - barrel nozzle to base - adjustable (mm):	80 - 175
Max. Moulding Area (mm2)	5000
Electric Motor (HP):	2
Electric Heater (kW):	0.75
Approximate Machine Dimensions (mm):	1500 x 610 x 1500
Approximate Net / Gross Weight (Kgs.):	175 / 250
Approximate Shipping Volume (m3):	1.40

VIDEO OF 40-HM INJECTION MOULDING MACHINE

Vertical Plastic Injection Moulding Machines

Vertical Plastic Injection Moulding Machines with Horizontal Hydraulic Toggle Locking

MODEL: 60-VH/S

- Horizontal Toggle Locking (Hydraulic Toggle)

- Injection Unit can be raised and lowered vertically as per requirement of moulds

- Mould Runner center can be aligned horizontally by shifting the fixed platen

- Plunger Type Machine Model 60-VH available in both Semi and Fully Automatic Type.

- Screw Type Machine Model 60-VH/S available in Fully Automatic Type (Suck back provided)

MODEL: 60-VH Fully Automatic

MODEL:	60-VH	60-VH/S
Type:	Plunger Type	Screw Type
Max. Moulding Capacity* (gms.):	60	60
Screw Diameter (mm):	--	30
Max. Swept Volume (cm3):	--	70
Max. Injection Pressure* (kg / cm2):	900	1100
Max. Plasticising Capacity* Semi / Fully Automatic (kg / hr):	7.2 / 10.8	-- / 14.4
Max. Shots per Hour* Semi / Fully Automatic (nos / hr):	120 / 180	-- / 240
Max. dimensions of mould L x B x H (mm):	200 x 200 x 200	200 x 200 x 200
Max. Mould Opening (mm):	200	200
Number of Tie Bars:	2	2
Clear Gap between Tie Bars (mm):	230	230
Injection Nozzle Centre (mould back to Runner) (mm):	30 - 80 Adjustable	30 - 80 Adjustable
Clamping Force (Adjustable) (Tons):	25 Hydraulic Toggle	25 Hydraulic Toggle
Max. Pump Pressure (adjustable) (kg / cm2):	140	140
Oil Tank Capacity (Liters):	75	75
Electric Motor (HP):	3	3 (Hydraulic System) + 2 (Screw Drive)
Total Heating Load (kW):	1.5	1.5
Approximate Machine Dimensions L x B x H (mm):	1480 x 700 x 2400	1480 x 700 x 2400
Approximate Net / Gross Weight (Kgs.):	700 / 1000	850 / 1150
Approximate Shipping Volume (m3):	3.20	3.20

Vertical Semi Automatic Bench Mounting Plastic Injection Moulding Machines Plunger Type

MODEL: 60-VH Semi Automatic

- Fully Hydraulic Injection and Clamping Unit

- Operation by manually actuated Hydraulic Valves

- Injection Unit vertically adjustable to accommodate various moulds

- Fixed mould plates adjustable to align nozzle centre to mould runner

- Direct mould clamping unit. Does not need adjustment for stroke as it is Direct Locking Type

- Hand Moulds can be used. Automatic moulds with vertical injection can also be used

MODEL: AU-30-HD

MODEL:	AU-30-HD	AU-60-HD
Max. Moulding Capacity* (gms.):	30	60
Max. Injection Pressure* (kg / cm2):	800	800
Max. dimensions of mould L x B x H (mm):	150 x 150 x 100	150 x 150 x 100
Adjustment of Fixed Mould Plate (min. / max.) (mm):	60 / 90	60 / 90
Vertical adjustment of Injection Unit to accommodate mould height (min. / max.) (mm):	90 / 150	90 / 150
Maximum moulding projected area* (cm2):	30	40
Clamping Force (Tons):	7.5	7.5
Clamping Stroke (mm):	75	75
Electric Motor (HP):	2	2
Approximate Machine Dimensions L x B x H (mm):	1100 x 680 x 1250	1100 x 680 x 1325
Approximate Net / Gross Weight (Kgs.):	300 / 450	350 / 500
Approximate Shipping Volume (m3):	1.30	1.35

Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes (Extra optional Nozzles available for moulding Nylon, Polyester, acrylics, soft PVC, etc.)

* - Depends on material, processing conditions, individual articles, mould design, etc.

PLASJET - Horizontal Fully Automatic Plastic Injection Moulding Machines with Direct Drive Screw

- Soft mould closing and opening with speed control. Low Pressure mould protection provided
- Direct Hydraulic Screw drive with reciprocating injection carriage.
- Multi-Stage Injection pressure / speed
- Suck-back screw for melt decompression
- Injection with screw rotation facility
- Hydraulically and electrically interlocked safety gate
- Central lubrication
- PJ-65 and PJ-80 with Toggle Type mould clamping unit
- PJ-100 and PJ-180 with Direct Hydraulic Telescopic Ram type Clamping Unit

MODEL:	PJ - 65	PJ - 80	PJ - 100	PJ - 180
Screw Diameter (mm):	35	35	40	55
Injection Pressure (Bar):	1760	1760	1350	1500
Stroke Volume (cm3):	105	120	201	380
Screw Stroke (mm):	110	135	160	190
Max. Injected Weight (Gms.):	95	117	180	340
Injection Rate (Gms./Sec.):	70	82	138	159
Plastisizing Rate (Gms./Sec.):	8.7	10.5	15	22
Screw Length (max.) (L/D):	22	22	20	16
Screw Speed (RPM):	250	250	250	200
Heating Capacity (kW):	6.0	6.5	10.0	11.0
No. of Heating Zones:	4	4	4	5
Nozzle Holding Force (kN):	20	20	40	50
Clamping Unit:	Hydraulic Toggle	Hydraulic Toggle	Direct Hydraulic Telescopic Ram	Direct Hydraulic Telescopic Ram
Clamping Force (kN):	650	800	1000	1800
Mould Opening Stroke (mm):	300	300	500	550
Mould Height (min. / max.) (mm):	150 / 300	175 / 350	200	350
Max. Daylight (mm):	600	650	700	900
Clear Gap between Tie Bars (mm):	320 x 145	320 x 145	325 x 325	425 x 425
Size of Mould Plates (H x V) (mm):	500 x 325	500 x 325	525 x 525	650 x 650
Ejector Force (kN)	Mechanical	Mechanical	40	70
Ejector Stroke (mm):	90	90	95	125
Pump Drive (kW):	9.37	10.25	15	22.5
Total Connected Power (kW):	15.37	17.75	25	33.5
Oil Tank Capacity (liters):	225	250	375	500
Approximate Shipping Dimensions (mm):	3800x1000x1700	4000x1000x1700	5200x1200x1700	5600x1300x1800
Approximate Net / Gross Weight (Kgs.):	2300 / 2800	2500 / 3000	5000 / 6000	6500 / 7800
Approximate Shipping Volume (m3):	6.5	6.8	10.6	13.1

Optional Accessories: Microprocessor Control with Mould Program Memory, Hydraulic Ejector

AUTOMIC - Mechanical Type Semi-automatic Vertical Plastic Injection Moulding Machines

- Bench mounting type

- Moulds of hand opetared machines can be used

- Simple electrical system

- Versatile machine suitable for moulding various textile parts, automobile parts, industrial items, insert mouldings, electrical fittings, pens and stationary items, jewelry boxes, gift articles, hardware items, plumbing items, caps, closures, house hold articles, etc.

Model:	AM-15	AM-30	AM-60	AM-100	AM-125	AM-180
Max. Moulding Capacity (gms.):	15	30	60	100	125	180
Max. Plasticising Capacity (kg / hr):	1.5	2.5	3.5	4.5	5.0	7.0
Max. Shots per Hour (nos / hr):	120	120	100	80	80	80
Distance - Back to Cylinder Nose (mm):	72	75	80	90	90	120
Distance - Cylinder Nose to Base (mm):	135	165	200	225	225	250
Working Base Width (mm):	300	300	325	325	375	400
Adjustment of Clamping Vice (mm):	70	80	110	125	125	135
Hopper Capacity (gms):	500	750	800	1000	1225	2000
Electric Motor (HP):	0.25	0.5	0.5	1.0	1.0	2.0
Heating Load (kW):	1.2	1.5	1.5	2.5	2.5	3.0
Net / Gross Weight (kgs):	175 / 235	250 / 340	300 / 400	325 / 440	350 / 470	450 / 600
Overall dimensions (m):	1.0 x 0.5 x 1.0	1.2 x 0.5 x 1.05	1.35 x 0.6 x 1.2	1.6 x 0.6 x 1.3	1.8 x 0.6 x 1.3	2.0 x 0.7 x 1.5
Shipping Volume (m3):	0.50	0.65	1.00	1.25	1.45	2.10

Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes (Extra optional Cylinders available for moulding Nylon, Polyester, acrylics, soft PVC, etc.)

Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form