|
|
| INJECTA - Horizontal Hydraulic Plastic Injection Moulding Machines |
|
 Semi Automatic Plunger Type MODEL: IN-60, IN-75 |
 Fully Automatic Plunger Type MODEL: IN-100, IN-125 |
 Fully Automatic Screw Type MODEL: IN-100S, IN-125S |
|
Horizontal Hydraulic, Semi and Fully Automatic Plastic Injection Moulding Machines, Plunger Type
Specifications:
| MODEL: | IN - 60 | IN - 75 | IN - 100 | IN - 125 |
| Max. Moulding Capacity* (gms.): | 60 | 75 | 100 | 125 |
| Max. Injection Pressure (kg / cm2) / (psi): | 1000 / 15000 | 1000 / 15000 | 1000 / 15000 | 1000 / 15000 |
| Max. Plasticising Capacity* Semi Automatic (kg / hr): |
7.20 | 9.00 | 10.00 | 10.00 |
| Max. Plasticising Capacity* Fully Automatic (kg / hr): |
10.80 | 12.00 | 13.00 | 13.75 |
| Max. Shots per Hour* Semi Automatic (nos / hr): |
120 | 120 | 100 | 80 |
| Max. Shots per Hour* Fully Automatic (nos / hr): |
180 | 160 | 130 | 110 |
| Max. dimensions of mould L x B x H (mm): | 245 x 250 x 250 | 270 x 250 x 270 | 290 x 300 x 300 | 290 x 300 x 300 |
| Max. Mould Opening (mm): | 225 | 250 | 300 | 320 |
| Number of Tie Bars (nos.): | 2 | 2 | 4 | 4 |
| Clear Gap between Tie Bars (mm): | 275 | 300 | 320 x 145 | 320 x 145 |
| Centre Height of Injection Nozzle (mm): | 175 | 190 | 225 | 225 |
| Clamping Force (tons): | 30 | 35 | 60 | 80 |
| Max. Pump Pressure (adjustable) (kg / cm2): | 140 | 140 | 140 | 140 |
| Oil Tank Capacity (liters): | 100 | 115 | 150 | 150 |
| Electric Motor (HP): | 7.5 | 10 | 12.5 | 12.5 |
| Total Heating Load (kW): | 1.5 | 1.75 | 3.0 | 4.0 |
| Approximate Machine Dimensions (mm): | 2300 x 600 x 1400 | 2500 x 600 x 1400 | 2800 x 750 x 1600 | 3000 x 750 x 1600 |
| Approximate Net / Gross Weight (Kgs.): | 1000 / 1300 | 1300 / 1500 | 2500 / 2800 | 2600 / 3000 |
| Approximate Shipping Volume (m3): | 2.85 | 3.10 | 4.70 | 5.00 |
Horizontal Hydraulic, Fully Automatic Plastic Injection Moulding Machines, Screw Type
Specifications:
| MODEL: | IN - 60S | IN - 75S | IN - 100S | IN - 125S |
| Screw Diameter (mm): | 30 | 30 | 35 | 35 |
| Max. Moulding Capacity* (gms.): | 60 | 75 | 100 | 125 |
| Max. Injection Pressure (kg / cm2): | 1100 | 1200 | 1800 | 1800 |
| Max. Plasticising Capacity* (kg / hr): | 14.4 | 18 | 18 | 22.5 |
| Max. Shots per Hour* (nos / hr): | 240 | 240 | 180 | 180 |
| Dry Cycles per Hour: | 400 | 400 | 350 | 350 |
| Max. Swept Volume (cm3): | 77 | 90 | 120 | 140 |
| Max. dimensions of mould L x B x H (mm): | 245 x 250 x 250 | 270 x 250 x 270 | 290 x 300 x 300 | 290 x 300 x 300 |
| Max. Mould Opening (mm): | 225 | 250 | 300 | 320 |
| Number of Tie Bars (nos.): | 2 | 2 | 4 | 4 |
| Clear Gap between Tie Bars (mm): | 275 | 300 | 320 x 145 | 320 x 145 |
| Centre Height of Injection Nozzle (mm): | 175 | 190 | 225 | 225 |
| Clamping Force (tons): | 30 | 35 | 60 | 80 |
| Max. Pump Pressure (adjustable) (kg / cm2): | 140 | 140 | 140 | 140 |
| Oil Tank Capacity (liters): | 100 | 115 | 175 | 200 |
| Electric Motor (HP): | 7.5 | 10 | 12.5 | 12.5 |
| Total Heating Load (kW): | 1.5 | 1.75 | 2.5 | 3.2 |
| Approximate Machine Dimensions (mm): | 2300 x 600 x 1400 | 2500 x 600 x 1400 | 2800 x 750 x 1600 | 3000 x 750 x 1600 |
| Approximate Net / Gross Weight (Kgs.): | 1200 / 1500 | 1500 / 1700 | 2700 / 3000 | 2800 / 3200 |
| Approximate Shipping Volume (m3): | 2.85 | 3.10 | 4.70 | 5.00 |
Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes, acrylics, ABS, flexible PVC, rigid PVC (in Screw Type machines only), etc. Extra optional Nozzles available for moulding Nylon, Polyester, etc.
* - Depends on material, processing conditions, individual articles, mould design, etc.
|
VIDEO OF IN-75S INJECTION MOULDING MACHINE |
|
VIDEO OF IN-100 INJECTION MOULDING MACHINE |
| Vertical Hydraulic, Semi-Automatic Plastic Injection Moulding Machine, Plunger Type |
|
 Model: 40HM |
|
VIDEO OF 40-HM INJECTION
MOULDING MACHINE
|
|
Vertical Plastic Injection Moulding Machines with Horizontal Hydraulic Toggle Locking
 MODEL: 60-VH/S |
- Horizontal Toggle Locking (Hydraulic Toggle) - Injection Unit can be raised and lowered vertically as per requirement of moulds - Mould Runner center can be aligned horizontally by shifting the fixed platen - Plunger Type Machine Model 60-VH available in both Semi and Fully Automatic Type. - Screw Type Machine Model 60-VH/S available in Fully Automatic Type (Suck back provided) |
 MODEL: 60-VH Fully Automatic |
| MODEL: | 60-VH | 60-VH/S |
| Type: | Plunger Type | Screw Type |
| Max. Moulding Capacity* (gms.): | 60 | 60 |
| Screw Diameter (mm): | -- | 30 |
| Max. Swept Volume (cm3): | -- | 70 |
| Max. Injection Pressure* (kg / cm2): | 900 | 1100 |
| Max. Plasticising Capacity* Semi / Fully Automatic (kg / hr): |
7.2 / 10.8 | -- / 14.4 |
| Max. Shots per Hour* Semi / Fully Automatic (nos / hr): |
120 / 180 | -- / 240 |
| Max. dimensions of mould L x B x H (mm): | 200 x 200 x 200 | 200 x 200 x 200 |
| Max. Mould Opening (mm): | 200 | 200 |
| Number of Tie Bars: | 2 | 2 |
| Clear Gap between Tie Bars (mm): | 230 | 230 |
| Injection Nozzle Centre (mould back to Runner) (mm): | 30 - 80 Adjustable | 30 - 80 Adjustable |
| Clamping Force (Adjustable) (Tons): | 25 Hydraulic Toggle | 25 Hydraulic Toggle |
| Max. Pump Pressure (adjustable) (kg / cm2): | 140 | 140 |
| Oil Tank Capacity (Liters): | 75 | 75 |
| Electric Motor (HP): | 3 | 3 (Hydraulic System) + 2 (Screw Drive) |
| Total Heating Load (kW): | 1.5 | 1.5 |
| Approximate Machine Dimensions L x B x H (mm): | 1480 x 700 x 2400 | 1480 x 700 x 2400 |
| Approximate Net / Gross Weight (Kgs.): | 700 / 1000 | 850 / 1150 |
| Approximate Shipping Volume (m3): | 3.20 | 3.20 |
Vertical Semi Automatic Bench Mounting Plastic
Injection Moulding Machines Plunger Type
 MODEL: 60-VH Semi Automatic |
- Fully Hydraulic Injection and Clamping Unit - Operation by manually actuated Hydraulic Valves - Injection Unit vertically adjustable to accommodate various moulds - Fixed mould plates adjustable to align nozzle centre to mould runner - Direct mould clamping unit. Does not need adjustment for stroke as it is Direct Locking Type - Hand Moulds can be used. Automatic moulds with vertical injection can also be used |
 MODEL: AU-30-HD |
| MODEL: | AU-30-HD | AU-60-HD |
| Max. Moulding Capacity* (gms.): | 30 | 60 |
| Max. Injection Pressure* (kg / cm2): | 800 | 800 |
| Max. dimensions of mould L x B x H (mm): | 150 x 150 x 100 | 150 x 150 x 100 |
| Adjustment of Fixed Mould Plate (min. / max.) (mm): | 60 / 90 | 60 / 90 |
| Vertical adjustment of Injection
Unit to accommodate mould height (min. / max.) (mm): |
90 / 150 | 90 / 150 |
| Maximum moulding projected area* (cm2): | 30 | 40 |
| Clamping Force (Tons): | 7.5 | 7.5 |
| Clamping Stroke (mm): | 75 | 75 |
| Electric Motor (HP): | 2 | 2 |
| Approximate Machine Dimensions L x B x H (mm): | 1100 x 680 x 1250 | 1100 x 680 x 1325 |
| Approximate Net / Gross Weight (Kgs.): | 300 / 450 | 350 / 500 |
| Approximate Shipping Volume (m3): | 1.30 | 1.35 |
Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes (Extra optional Nozzles available for moulding Nylon, Polyester, acrylics, soft PVC, etc.)
* - Depends on material, processing conditions, individual articles, mould design, etc.
| PLASJET - Horizontal Fully Automatic Plastic Injection Moulding Machines with Direct Drive Screw |
|
|
|
- Soft mould closing and opening with speed
control. Low Pressure mould protection provided |
| MODEL: | PJ - 65 | PJ - 80 | PJ - 100 | PJ - 180 |
| Screw Diameter (mm): | 35 | 35 | 40 | 55 |
| Injection Pressure (Bar): | 1760 | 1760 | 1350 | 1500 |
| Stroke Volume (cm3): | 105 | 120 | 201 | 380 |
| Screw Stroke (mm): | 110 | 135 | 160 | 190 |
| Max. Injected Weight (Gms.): | 95 | 117 | 180 | 340 |
| Injection Rate (Gms./Sec.): | 70 | 82 | 138 | 159 |
| Plastisizing Rate (Gms./Sec.): | 8.7 | 10.5 | 15 | 22 |
| Screw Length (max.) (L/D): | 22 | 22 | 20 | 16 |
| Screw Speed (RPM): | 250 | 250 | 250 | 200 |
| Heating Capacity (kW): | 6.0 | 6.5 | 10.0 | 11.0 |
| No. of Heating Zones: | 4 | 4 | 4 | 5 |
| Nozzle Holding Force (kN): | 20 | 20 | 40 | 50 |
| Clamping Unit: | Hydraulic Toggle | Hydraulic Toggle | Direct Hydraulic Telescopic Ram |
Direct Hydraulic Telescopic Ram |
| Clamping Force (kN): | 650 | 800 | 1000 | 1800 |
| Mould Opening Stroke (mm): | 300 | 300 | 500 | 550 |
| Mould Height (min. / max.) (mm): | 150 / 300 | 175 / 350 | 200 | 350 |
| Max. Daylight (mm): | 600 | 650 | 700 | 900 |
| Clear Gap between Tie Bars (mm): | 320 x 145 | 320 x 145 | 325 x 325 | 425 x 425 |
| Size of Mould Plates (H x V) (mm): | 500 x 325 | 500 x 325 | 525 x 525 | 650 x 650 |
| Ejector Force (kN) | Mechanical | Mechanical | 40 | 70 |
| Ejector Stroke (mm): | 90 | 90 | 95 | 125 |
| Pump Drive (kW): | 9.37 | 10.25 | 15 | 22.5 |
| Total Connected Power (kW): | 15.37 | 17.75 | 25 | 33.5 |
| Oil Tank Capacity (liters): | 225 | 250 | 375 | 500 |
| Approximate Shipping Dimensions (mm): | 3800x1000x1700 | 4000x1000x1700 | 5200x1200x1700 | 5600x1300x1800 |
| Approximate Net / Gross Weight (Kgs.): | 2300 / 2800 | 2500 / 3000 | 5000 / 6000 | 6500 / 7800 |
| Approximate Shipping Volume (m3): | 6.5 | 6.8 | 10.6 | 13.1 |
Optional Accessories:
Microprocessor Control with Mould Program Memory, Hydraulic Ejector
| AUTOMIC - Mechanical Type Semi-automatic Vertical Plastic Injection Moulding Machines |
|
|
|
- Bench mounting type - Moulds of hand opetared machines can be used - Simple electrical system - Versatile machine suitable for moulding various textile parts, automobile parts, industrial items, insert mouldings, electrical fittings, pens and stationary items, jewelry boxes, gift articles, hardware items, plumbing items, caps, closures, house hold articles, etc.
|
| Model: | AM-15 | AM-30 | AM-60 | AM-100 | AM-125 | AM-180 |
| Max. Moulding Capacity (gms.): | 15 | 30 | 60 | 100 | 125 | 180 |
| Max. Plasticising Capacity (kg / hr): | 1.5 | 2.5 | 3.5 | 4.5 | 5.0 | 7.0 |
| Max. Shots per Hour (nos / hr): | 120 | 120 | 100 | 80 | 80 | 80 |
| Distance - Back to Cylinder Nose (mm): | 72 | 75 | 80 | 90 | 90 | 120 |
| Distance - Cylinder Nose to Base (mm): | 135 | 165 | 200 | 225 | 225 | 250 |
| Working Base Width (mm): | 300 | 300 | 325 | 325 | 375 | 400 |
| Adjustment of Clamping Vice (mm): | 70 | 80 | 110 | 125 | 125 | 135 |
| Hopper Capacity (gms): | 500 | 750 | 800 | 1000 | 1225 | 2000 |
| Electric Motor (HP): | 0.25 | 0.5 | 0.5 | 1.0 | 1.0 | 2.0 |
| Heating Load (kW): | 1.2 | 1.5 | 1.5 | 2.5 | 2.5 | 3.0 |
| Net / Gross Weight (kgs): | 175 / 235 | 250 / 340 | 300 / 400 | 325 / 440 | 350 / 470 | 450 / 600 |
| Overall dimensions (m): | 1.0 x 0.5 x 1.0 | 1.2 x 0.5 x 1.05 | 1.35 x 0.6 x 1.2 | 1.6 x 0.6 x 1.3 | 1.8 x 0.6 x 1.3 | 2.0 x 0.7 x 1.5 |
| Shipping Volume (m3): | 0.50 | 0.65 | 1.00 | 1.25 | 1.45 | 2.10 |
Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes (Extra optional Cylinders available for moulding Nylon, Polyester, acrylics, soft PVC, etc.)
|
|
Maneklal Global Exports |
 |
