Model PH-1

- Four-Stroke overhead valve, compression ignition engine with Direct Injection - Cast Iron crankcase, cylinder and cylinder head - Centrifugal type cooling fan integral with the flywheel - Forged steel crankshaft with aluminium tin shell bearings - Forged steel connecting rod and aluminium piston - Lubrication with oil pump - Also available in Water Cooled Version as Model PH 1 W and PH 2 W - Engine Rotation in Clockwise / Anti-clockwise direction

Model PH-2

Technical Specifications:

Fixed Speed Engine Ratings:

8 HP / 1500 RPM - MODEL PA - 8

22 HP / 1500 RPM with Electric Start- MODEL PA - 22 SP

Vertical, Air Cooled, Compression Ignition, Direct Injection, Four Stroke Cycle, SINGLE CYLINDER, High Speed Diesel Engines 

Vertical, Air Cooled, Compression Ignition, Direct Injection, Four Stroke Cycle, TWIN CYLINDER, High Speed Diesel Engines

* Note - TRB: Taper Roller Bearing / BB - Bush Bearing

12.5 HP / 1500 RPM - MODEL PVP - 12

25 HP / 1500 RPM - MODEL PVP - 25

Vertical, Water Cooled, Compression Ignition, Direct Injection, Four Stroke Cycle, SINGLE CYLINDER, High Speed Diesel Engines

Vertical, Water Cooled, Compression Ignition, Direct Injection, Four Stroke Cycle, TWIN CYLINDER, High Speed Diesel Engines

* Note - TRB: Taper Roller Bearing / BB - Bush Bearing

Vertical, Four Stroke, Direct Injection, Three Cylinder, 1500 RPM, Water Cooled Diesel Engine, Bush Bearing Type with Geared Oil Pump, Heavy Flywheel and Governing Class II with Self Start arrangement and alternator type battery charger

37.5 HP / 1500 RPM - MODELO: PT - 37

MODEL: PT-30 PT-37 Rated Power (HP / kW): 30.0 / 22.0 37.5 / 26.7 Rated Engine Speed (RPM): 1500 1500 No. of cylinders: THREE THREE Bore (nominal) (mm): 102.0 114.3 Stroke (mm): 116.0 116.0 Cubic Capacity (cm3): 2844 3570 Compression Ratio: 16.5 : 1 16.5 : 1 Bearings: Bush Bearings Bush Bearings Oil Pump: Geared Oil Pump Geared Oil Pump Fuel Consumption (g/kWh): 251 251 Oil Sump Capacity (Liters): 7.67 7.67 Oil Consumption: 1% of SFC 1% of SFC Fuel Tank Capacity (Liters): 41.750 41.750 Governing Class: A2 A2 Crankshaft Centre Height (mm): 203.2 203.2 Torque at full load (Crankshaft Drive) (KNM / KGM): 0.140 / 14.28 0.176 / 17.92 Net / Gross Wt. (Kgs.): 410 / 600 425 / 610 Shipping Dimensions (LxWxH) (mm): 1550 x 870 x 1170 1550 x 870 x 1170 Shipping Volume (m3): 1.60 1.60

Standard Equipment: Self Starting Arrangement with alternator type battery charger (supplied without battery), Dry air filter, Control Panel consisting of water temperature indicator, Oil pressure gauge, Operating hour meter, RPM meter, Emergency Stop Button, Hooter Alarm, Toolbox, Operation Manual, etc.

4.5 HP / 2050 RPM - MODEL PVL - 45

MODEL: PVL - 30 PVL - 45 PVL - 50 PVL - 65 Rated Power (HP / kW): 3 / 2.2 4.5 / 3.3 5 / 3.7 6.5 / 4.8 Rated Speed (RPM): 1500 2050 1500 2050 Bore (mm): 76 76 87.5 87.5 Stroke (mm): 76 76 90 90 Cylinder Capacity (cm3): 345 345 541 541 Fuel Tank Capacity (Liters): 3.75 3.75 3.75 3.75 Specific Fuel Consumption at Full Load and at standard reference conditions (Gms. / BHP. Hr.) / (Gms. / kW. Hr.): 185 / 250 204 / 275 185 / 250 204 / 275 Lubricating Oil Sump Capacity (Liters): 1.5 1.5 1.5 1.5 Lubricating Oil Consumption (max.) (Liters / Hr.): 0.006 0.009 0.010 0.013 Approximate Net / Gross Wt. (Kgs.): 85 / 125 85 / 125 100 / 140 100 / 140 Shipping Dimensions (L x W x H) (mm): 545 x 545 x 765 545 x 545 x 765 545 x 545 x 765 545 x 545 x 765 Shipping Volume (m3): 0.23 0.23 0.23 0.23

Centrifugal Pump (APL Series) Coupled with Engine: MODEL: PVL-30 + APL 252/1 PVL-45 + APL 252/2 PVL-50 + APL-325/1 PVL-65 + APL-325/3 Size (Suction x Delivery): 65 x 50 65 x 50 75 x 62 75 x 62 Pump Speed (RPM): 1500 2050 1500 2050 Rated Total Head (mm): 14 16 15 18 Rated Discharge (Liters / Sec.): 11 11 13 15 Approximate Net / Gross Weight (Kgs.): 140 / 210 140 / 210 120 / 180 120 / 180 Shipping Dimensions (L x W x H) (mm): 940 x 570 x 820 940 x 570 x 820 940 x 570 x 820 940 x 570 x 820 Shipping Volume (m3): 0.44 0.44 0.44 0.44

Portable Pump Set with 5 HP / 1500 RPM Engine (MODEL PVL - 50) & Pump size 75 x 62 mm (MODEL APL - 325/1)

8 HP / 850 RPM - MODEL AVL - 8

16 HP / 850 RPM - MODEL AVL - 16

Vertical, Water Cooled, Compression Ignition, Four Stroke Cycle, SINGLE CYLINDER, Slow Speed Diesel Engine

Vertical, Water Cooled, Compression Ignition, Four Stroke Cycle, TWIN CYLINDER, Slow Speed Diesel Engine

* Note - TRB: Taper Roller Bearing / BB - Bush Bearing

Pump Set with 10 HP / 1500 RPM Engine (Model PVP-10)  & 100 x 100 mm Centrifugal Pump

We can supply Centrifugal Pump Sets driven by the 'PA' SERIES AIR COOLED ENGINES and 'PVP' SERIES WATER COOLED ENGINES in Size of up to 150 mm x 150 mm We can also supply Self Priming Pumps (Mud Pumps) of Size 80 x 80 and 100 x 100

Generating Set with 10 HP / 1500 RPM Engine (Model PVP-10), Radiator for cooling and Trolley

7.5 KVA Generating Set, Single Phase / 240 V, with 10 HP / 1500 RPM Engine (Model PA-10)

We can supply Generating Sets driven by the 'PA' SERIES AIR COOLED ENGINES (from 2.5 KVA to 15 KVA) and driven by the 'PVP' SERIES WATER COOLED ENGINES (from 2.5 KVA to 20 KVA) in the following configurations:

AC / 220 V / 1 Phase / 50 Hz (2.5 to 15 KVA),
AC / 415 V / 3 Phase / 50 Hz (5 to 20 KVA),
AC / 380 V / 3 Phase / 50 Hz (5 to 20 KVA),
AC / 220 V / 3 Phase / 60 Hz (5 to 20 KVA)

We can also supply WELDING GENERATING SETS, Driven by PA-20, 20 HP Air Cooled Engine, for generating 200 Amps and 300 Amps Current.

We can supply Diesel Engine Spares for Various Lister and Petter Engines like:

8/1, 16/2, HR, HA, ST, SL, SR, LD, LR, LT, TS, PH-1, PH-2, etc.

Generally we can supply all the spares for these engines, chiefly Cylinder Barrel (Block), Piston Complete, Piston Ring Set, Con-Rods, Inlet Valve / Exhaust Valve, Valve Guides, Metal Bearing, Crankshafts, Gaskets, etc.

Maneklal Global Exports 67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA Tel: +9122-22041340 / 41 / 42 WhatsApp: +918879795490 e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form