|
|
| 2 D Pantograph Engraving Machines | 3 D Universal Pantograph Milling and Engraving Machines |
| 2 D Pantograph Engraving Machines |
|
 Model: SG-1 |
 Model: SG-2 |
| Features: |
|
-
Versatile machine that traces from a single 'master' an identical
reproduction on various sizes on all types of material, giving a truly
professional result - Multiple Engraving Possibilities: Sign Plates, Badges, Tags, Personal Effects, Identifications, Designations, Illustrations, Markings, Numbering, Trade Marking Symbols, Displays, Safety Warnings, and limitless other applications - Engraving is obtained by copying from a template or model. The template could be letters, numerals, etc. or any particular design. - Pantograph is provided with a variable ratio adjustment. Scales are provided on the pantograph for adjusting the desired ratio, which will always be reduction from the template or character - A Self Centering Work Holding Vice is provided with arrangements for lateral and cross movement - Copy holding slides are positioned on the tracer plate by a simple clamping device. This arrangement allows one or more composed texts to be positioned as desired. Graduated scales ensure parallelism between copy holding slides and work holding vice. - The cutter spindle runs in precision bearings at a speed of rotation designed for engraving a wide variety of materials. A regulating device automatically ensures constant depth of engraving on a flat or slightly uneven surface - Area covered by the pantograph can usually be increased by the movements of the vice as also sliding the pantograph carrier along its slideway, or alternatively by moving the copy holding slide or the component being engraved. Extra large areas can be engraved on the SG-2 machine as this machines ahs a Lift-off type pantograph which can be positioned as desired. - There are three types of Cutting tools / cutters: 1. High Speed Steel Cutters for engraving on perspex, acrylic, plastic, brass, anodized aluminum, hardwood, etc. 2.Tungsten Carbide Cutters for engraving on abrasive plastic material, bakelite, hylam, formica, etc. 3. Diamond Cutters for use of scratch marking on metals like Silver, Gold, Platinum or on glass, etc. Profiles of the cutters determine the form of the groove which is engraved and can be suitably ground on a cutter grinder - Model: SG-1 is a portable, affordable, bench machine, ideally suited for a variety of engraving jobs - Model: SG-2 is a multiple application engraving machine for precision bench work as well as extra large panels. It incorporates a special Lift-off type pantograph for engraving jobs not generally possible in other conventional machines. Adapted for electronic mimic panels, numbering parts, marking tools, gauges, fixtures, cutting stencils, special profiles, etc. |
| Specifications: |
| Model: | SG-1 | SG-2 |
| Pantograph Ratio (max.): | 2.5:1 | 2:1 |
| Pantograph Ratio (Min.): | 6:1 | 8:1 |
| Template Table: | 387 x 150 mm | 620 x 254 mm |
| Self Centering Vice max. opening: | 90 mm | 100 mm |
| Engraving Cutters diameter: | 3.15 mm | 6.35 mm |
| Dimensions: | 560 x 490 x 390 mm | 950 x 860 x 600 mm |
| Net / Gross Weight: | 17 / 35 kg. | 60 / 90 kg. |
| Standard Accessories: Motor, Copy Slide, Nylon belt, H. S. S. cutter, Carbide Cutter |
| Additional Recommended Tools and Spares: H. S. S. cutters, Carbide Cutters, Diamond Cutters, Copy Slides, Cutter Bottom, Ball Bearings, Cutter Head Spindle, Regulator with micrometer screw, nose, Vertical Copy Slides, End Stops, Rotary Fixture, Tabulator for engraving series of figures, Carbon Brushes, Nylon Belts, etc. |
 Rotary Fixture |
 Tabulator for engraving series of figures |
| Optional Accessories: Cutter Grinder Model: SG/CG-1, Master Copy type letter sets, etc. | |
|
|
Specifications:
- Cutter infeed: 0.02 mm |
| 3 D Universal Pantograph Milling and Engraving Machines |
|
|
Features: - These Three Dimensional Pedestal Type Pantograph Milling Engraving Machines are hand operated and have very wide applications - The machines can be used for Die-Sinking work such as Coining Dies, Forging Dies, and pattern-makers shop - The machines can be used for light milling work also - The machine body is of close grain cast-iron - The main spindle is fitted on high precision bearings and has 8 speeds ranging from 1100 to 12000 rpm. This wide range of speeds make it possible to use the correct speeds for different types of material - The swiveling points of the Pantograph arm system run in needle roller bearings giving a ling life without adjustment. Master shapes can be traced with high sensitivity and accuracy with the sensitive hinge system. - Foot operated switch leaves both hands of the operator free. The operator can comfortably, in a sitting position, reach all the controls for adjustment and operation - The reduction ratio of the pantograph arm can be adjusted beyond the usual values very accurately by putting slip gauge blocks between the measuring bases provided on the arms - The cutter spring goes up automatically by spring pressure after engraving each character, thus preventing spoiling of the job. It is also free of vibration even at maximum speed, thus ensuring a clean and excellent surface finish of the job |
 |
| Specifications: |
| Model: | PG-400 |
| Reduction ratio (Max): | 1:1.5 |
| Reduction ratio (Min): | 1:10 |
| Length of Pantograph arms: | 400 mm |
| Spindle Collets: | 3, 4, 5, 6 mm |
| Work Table | |
| Size: | 200 x 315 mm |
| No of ‘T’ slots: | 4 |
| Cross travel: | 160 mm |
| Vertical travel: | 320 mm |
| Longitudinal travel: | 260 mm |
| Maximum distance between cutter spindle and tail: | 320 mm |
| Template Table | |
| Size: | 315 x 450 mm |
| No of ‘T’ slots: | 4 |
| Vertical travel: | 150 mm |
| Longitudinal travel: | 160 mm |
| No. of cutting speeds: | 8 |
| Range of speeds: | 1100 - 12000 RPM |
| Motor: | 0.37 kW |
| Net / Gross weight: | 450 / 550 Kgs. |
| Overall Dimensions: | 1350 x 1100 x 1500 mm |
| Shipping Volume: | 2.3 m3 |
| Standard Accessories: Motor, Starter, Spindle Collets, Endless Cords, Cutter Setting Bar, Necessary Spares, Machine Lamp |
|
VIDEO OF 2D & 3D PANTOGRAPH ENGRAVING MACHINE MODEL: PG-400 |
| Optional Accessories: Single Lip Cutter Grinder, Set of Brass Letters and Numerals, Circular Letter Dial, Universal Vice: 4" & 6", Rough Milling Attachment, Circular Rotary Table, Indexing Work Holder with Chuck 4" (Tilting), Roll Engraving Attachment, Electric Etching Attachment. |
|
|
 Rough Milling Attachment |
 Universal Vice |
 Circular Table |
 Circular Letter Dial |
 Indexing Work Holder |
|
VIDEO OF SINGLE LIP CUTTER GRINDER |
|
|
Maneklal
Global Exports |
 |
|
TO OUR PAGE ON JEWELRY MACHINES & TOOLS |
|
