|
|
 Bench Anvil - 8" Length |
 Dapping (Doming) Blocks & Punches Grooving cum Dapping Blocks |
 Grooving Blocks |
 Ring Rods (Plain, Grooved, with Markings & Grooved with Markings) Bangle Rods (Oval & Round) |
 Reversible Ingot Moulds |
 Diamond Tools of following types: 120-170o 'V', 90-110o 'v', 120-170o Vertical, 180o Flat, 'V' Flat, Half Leaf (Right), Half Leaf (Left), Half Leaf (2 Way), Flat Center Milling, Outside Pipe (Convex), Inside Pipe (Concave), 'V' Inside Pipe, Inside Pipe 'V' Milling, Flat Inside Pipe, Centre Pipe Flat Milling, Pipe Centre Milling, 3 Side Flat, 2 Side Flat (Left), 2 Side Flat (Right), 'V' Left Side Milling, 'V' Right Side Milling, 'V' Milling, Flat 'V' Milling, 'V' Flat Milling, etc. |
|
|
|
SAW FRAME & SAW BLADES: |
 Saw Frame, Adjustable with Tension Screw |
 Saw Blades of length 134 mm in numbers 6/0, 5/0, 4/0, 3/0, 2/0, 0, 1, 2, 3, 4, 5 & 6 Supplied in packs of 144 pieces |
|
STEEL PLIERS, 4.5": |
 Flat Nose with Spring |
 Chain Nose with Spring |
 Side Cutting with Spring |
 Top Cutting with Spring |
 Round Nose with Spring |
|
|
|
FILES: |
 |
File Riffler
File Needle |
 |
 Flat File 8" with Rough Grains for Metal Chain Polishing |
 File Spindle, Triangular 6.5" |
We can supply various jewelers' tools like:
Chain Cutter, Caliper, Casting Block, Diamond Sieve, Diamond Grip, Diamond
Shovel, Disc Cutter, Divider, Draw Tong for pulling wire,
Draw Plate, Drill, Emery Stone, Emery Paper, Eye Glass, Eye Magnifier, Eye Loupe,
Gauge Micrometer, Gauge for measuring height, weight, etc, Gauge Eing Stick, Glass
Polishing, Grinder, Hammer, Hand Vice, Knife, Mandrel, Punch Box, Riveting tools,
Ring Holding Vice, Ring Holding Pliers, Scissors, Screw Driver, Sorting Tray,
Spanners, Spring Bar Remover, Table Vice, Tweezers, etc.
|
|
Maneklal
Global Exports |
 |
|
TO OUR PAGE ON JEWELRY MACHINES & TOOLS |
|
