* These Testers have been based on the Japanese Industrial
Standard JIS-D 5301 for Lead Acid Batteries.
* The tester has a 3 1/2 digit 20 Volts LED Voltmeter, powered by the Battery under
test
* The tester has 3 loads of 150 / 300 / 500 Amps, which could be selected,
depending on the capacity of the Battery, by means of a 3-way switch. The selected load is
indicated by the digital display
* Colour coded LEDs flash to indicate the condition of battery under load.
* To avoid over-discharging the battery under load test, an electronic timer is
provided which imposes the battery under test for a fixed time
* Model BCT-500A is additionally provided with a 3 1/2 digit LED Ammeter of 0 - 200
Amps to check the charging current of the battery. It can also be used to check the
cranking current of the starter motor, provided it is below 200 Amps
* The Model BCT-500 can test the Battery Voltage, Battery Condition under Load and
Voltage Regulator. The Model BCT-500A can additionally test the and Battery Cranking
Voltage
* Both the models are supplied trolley mounted with cables and clamps
Model: BCT-500 |
| Model: |
BCT-500 |
| For testing: |
12 V battery & charging systems |
| Load: |
150 / 300 / 500 Amps |
| Voltmeter: |
20 Volt LED |
| Ammeter: |
-- |
| Powered by: |
Battery under test |
| Dimensions (mm): |
380 x 300 x 210 |
| Net Weight (kgs): |
7.0 |
|
| Model: |
BCT-500A |
| For testing: |
12 V battery & charging systems |
| Load: |
150 / 300 / 500 Amps |
| Voltmeter: |
20 Volt LED |
| Ammeter: |
0 - 200 Amps |
| Powered by: |
Battery under test |
| Dimensions (mm): |
380 x 300 x 210 |
| Net Weight (kgs): |
8.0 |
|
Model: BCT-500A |
* Model: BCT-5 DPM is a rugged heavy duty model designed to
test 12 V batteries under load, charging systems and starter motor. Colour coded LEDs
flash to indicate the condition of battery under load.
* Model: BCT-7 DPM is a portable model to test load, battery condition, starter
motor and charging system of 12 V batteries. Colour coded LEDs flash to indicate the
condition of battery under load.
* LED Voltmeter is a digital voltmeter having Light Emitting Diode display. It is
powered by the battery under test and can be used for testing voltages between 8 - 20
Volts
* LCD Voltmeter is a digital voltmeter having Liquid Crystal display. It has a
range of 0 - 20 V with a least count reading of 0.01 Volts. It is used for testing open
circuit voltage of 2V, 6V and 12 V batteries as well as the charging system of an
automobile. Also available with range of 0 - 200 V to test 24 Volts system
Model: BCT-5 DPM |
| Model: |
BCT-5 DPM |
| For testing: |
12 Volts |
| Load: |
150 Amps |
| Voltmeter: |
LED |
| Range: |
20 Volts |
| Powered by: |
Battery under test |
| Dimensions (mm): |
220 x 160 x 120 |
| Net Weight (kgs): |
2.8 |
|
| Model: |
BCT-7 DPM |
| For testing: |
12 Volts |
| Load: |
60 / 125 Amps |
| Voltmeter: |
LED |
| Range: |
20 Volts |
| Powered by: |
Battery under test |
| Dimensions (mm): |
250 x 100 x 60 |
| Net Weight (kgs): |
1.2 |
|
Model: BCT-7 DPM |
LED Voltmeter |
| Model: |
LED Voltmeter |
| For testing: |
12 Volts |
| Voltmeter: |
LED |
| Range: |
8 to 20 Volts |
| Powered by: |
Battery under test |
| Dimensions (mm): |
140 x 70 x 20 |
| Net Weight (kgs): |
0.3 |
|
| Model: |
LCD Voltmeter |
| For testing: |
2, 6, 12 & 24 Volts |
| Voltmeter: |
LCD |
| Range: |
0 - 20 / 0 - 200 Volts |
| Powered by: |
9 Volts Battery |
| Dimensions (mm): |
140 x 70 x 20 |
| Net Weight (kgs): |
0.3 |
|
LCD Voltmeter |
 |
* A Digital Battery Tester to test 12 V batteries used in
motorcycles and scooters. The tester has two loads - 10 Amps to test 2.5AH batteries and
40 Amps to test batteries of 5.0 AH and above
* The tester checks Battery Voltage at No-Load, Battery Voltage under Load and
Battery Charging Voltage
* The tester has a 3 1/2 digit LED Voltmeter, which is powered by the battery under
test
|
| * This tester checks the battery condition and performs load
capacity test, starter motor condition test and full charging system analysis |
 |
Model: Mark-I |
| Model: |
Mark - I |
| For testing: |
6 V, 12 V, & 24 V Systems |
| Voltmeter: |
0 - 200 Volt |
| Ammeter: |
0 - 200 Amps |
| Powered by: |
9 V Battery |
| Dimensions (mm): |
220 x 160 x 120 |
| Net Weight (kgs.): |
2.5 |
|
| Model: |
Mark - II |
| For testing: |
12 V Systems only |
| Voltmeter: |
0 - 20 Volt |
| Ammeter: |
0 - 200 Amps |
| Powered by: |
Battery under test |
| Dimensions (mm): |
250 x 100 x 60 |
| Net Weight (kgs.): |
1.2 |
|
Model: Mark-II |
 |
* The Tach-Dwell tester has been designed to check the RPM
and Dwell Angle of 3 and 4 Cylinder cars
* Easy to operate, the tester has a 3 1/2 digit LED meter, powered by the battery
under test
|
