MANEK MACHINES - wire butt welding machines - upset butt welding machine - rod butt welding machine - band saw blade welding machine - flash butt welding machine

Butt Welding Machines
for Wire and Band Saw Blades

Micro Butt Welding Machine for Wire	Butt Welding Machines for Wire	Upset Butt Welding Machines for Wire	Rod, Carbon Steel and Bimetal Blade Butt Welding Machines	Rod Butt Welding Machines - Pneumatically Operated with Thyristorised Electronic Timer
	Butt Welding Machines for Band Saw Blade	Upset Butt Welding Machines for Band Saw Blade	Flash Butt Welding Machine - Pneumatically Operated - for Band Saw Blade	Band Saw Blades

Micro Butt Welders for Fine Wires

Welding Process:
- The ends of the wires to be joined are 'prepared' on the special shearing attachment (optional)
- Welding current and initial up-set gap set according to the size of wire, the up-setting pressure being preset at works
- The wire ends are rigidly clamped by special quick acting clamps and viewed through an illuminated magnifying glass (optional), to ensure correct alignment of the wire ends
- By pushing the button, butt welding cycle is initiated and completed automatically by built-in controls
- Weld completed, the job is then de-clamped and annealed in the annealing device (optional), if necessary

Features:
- Specially designed for Butt Welding of ferrous and non-ferrous wires in the range of 0.30 to 2.50 mm diameter, to withstand subsequent drawing
- The automatic welding process ensures high tensile and uniform welds
- Upset Travel - Movable platen travel on two parallel guides
- Upset Pressure - Provided by a precision spring action on the movable platen, precalibrated
- Electrodes - Special wear resistant copper alloy electrodes provided with precision 'V' grooves, permit rapid and accurate alignment of wires
- Adjustment of welding current by 8 position rotary switch

Specifications:

Model:	MMBW-12	MMBW-15	MMBW-20	MMBW-25	MMBW-08C	MMBW-15C	MMBW-25C	MMBW-30C	MMBW-35C
Nominal Rating (KVA):	1	1	1	1	1	1	3	4	5
Input Volts:	230	230	230	230	230	230	230	230	400
Frequency (Hz):	50	50	50	50	50	50	50	50	50
Phase:	1	1	1	1	1	1	1	1	2
Fuse Rating:	6	6	6	6	6	6	13	13	16
Shearing attachment for range diameter (mm)	0.3 - 1.2	0.5 - 1.5	0.7 - 2.0	0.7 - 2.5	0.3 - 0.8	0.5 - 1.5	0.8 - 2.5	0.8 - 2.5	1.5 - 3.8
Dimensions (mm):	213 x 193 x 450	213 x 193 x 450	213 x 193 x 450	213 x 193 x 450	213 x 193 x 450	213 x 193 x 450	213 x 193 x 450	220 x 200 x 450	240 x 300 x 450
Net Weight (Kg):	15.5	15.5	15.5	15.5	15.5	15.5	20	20	35
WELDING DATA
Material to be welded:	Iron, Steel, Nickel	Iron, Steel, Nickel	Iron, Steel, Nickel	Iron, Steel, Nickel	Copper, Brass, Bronze, Aluminium	Copper, Brass, Bronze, Aluminium	Copper, HiCarbon, Aluminium, Mild Steel	Iron, Steel, Nickel, Copper, Brass, Aluminium, HiCarbon	Iron, Steel, Nickel, Copper, Brass, Aluminium, HiCarbon
Welding Range diameter (mm):	0.3 - 1.2	0.5 - 1.5	0.7 - 2.0	0.8 - 2.5	0.3 - 0.8	0.5 - 1.5	0.8 - 2.5	1.0 - 3.0	1.5 - 3.8

Wire Butt Welding Machine

Welding Process:
- The welding operation on these machines is automatic and the settings are easy
- Electrode spacing is adjusted by a lever set against a plate calibrated for wire diameter
- Upsetting pressure is adjusted by means of a dial calibrated for wire diameter
- Welding current is selected by a rotary switch
- Wires to be joined should be cut straight, exactly at right angles and free from burrs
- Wire ends are clamped by spring loaded clamping device which can be opened singly or together by foot pedals
- Releasing the foot pedals leaves the wire clamped under adequate pressure
- By the push of the button, welding cycle is initiated and completed automatically by built-in controls
- Weld completed, the job is then de-clamped and annealed if necessary in the separate annealing electrodes

Features:
- Upset Travel - Movable platen travel on two parallel guides
- Upset Pressure - Provided by a precision spring action on the movable platen
- Electrodes - Special wear resistant copper alloy electrodes provided with precision 'V' grooves, permit rapid and accurate alignment of wires
- Adjustment of welding current in 6 steps from 50% to 100% by rotary switch

Specifications:

Model:		MWBW-5	MWBW-8	MWBW-10	MWBW-12	MWBW-20
Max. Rating (KVA):		5	8	10	12	20
Duty Cycle at Max. Rating:		2%	0.73%	0.73%	0.56%	0.45%
Input Volts:		400	400	400	400	400
Frequency (Hz):		50	50	50	50	50
Phase:		1	1	1	1	1
Fuse Rating:		10	10	10	15	15
Net Weight with movable stand:		57	64	64	64	64
Dimensions with movable stand (mm):		915 x 685 x 1120	915 x 685 x 1120	915 x 685 x 1120	915 x 685 x 1120	915 x 685 x 1120
WELDING DATA
Material to be welded:		Iron, Steel	Alloy Steel and Carbon Steel	Alloy Steel and Carbon Steel	Copper, Brass	Light Alloys
Welding Range - wire diameter (mm):	Steel with less then 0.5% C, unalloyed	2 - 8	2 - 8	2 - 10	1 - 5	3 - 8
	Steel with 0.5 to 1% C, alloyed	--	2 - 8	2 - 8	--	--
	Copper	2 - 3	--	--	1 - 4	2.5 - 6
	Aluminium Light Metal	3 - 5	--	--	1.5 - 6	4 - 7

VIDEO OF WIRE BUTT WELDING MACHINE MODEL: MWBW-8

VIDEO OF WIRE BUTT WELDING MACHINE MODEL: MWBW-8 with OPTIONAL: GRINDER

VIDEO OF WIRE BUTT WELDING MACHINE MODEL: MWBW-20 for BUNCHED / STRANDED COPPER WIRE

Model: MWBW-8 with Optional: Grinder

Model: MWBW-8 with Optional: Grinder & Vice

Upset Butt Welding Machine

Model: MUBW-20

Application:
- Suitable for upset but welding of all profiles of wires and flats of iron, steel, alloy and carbon steel, copper, aluminium, brass and other light metals and their alloys

Features:
- Upset Travel - Movable platen travel on two parallel guides
- Upset Pressure - Provided by a precision spring action on the movable platen
- Clamps - Lever operated adjustable 'floating' steel clamps of precision quick acting design ensure firm preset clamping pressure. Release quick and easy.
- Electrodes - Special wear resistant copper alloy electrodes provided with precision 'V' grooves, permit rapid and accurate alignment of wires
- Adjustment of welding current by means of a 8 step rotary switch from 50% to 100%
- Electrode Spacing - Obtained with ease by a lever set against an indexing plate, adjusting in 10 steps
- Annealing Facility - Separate annealing electrodes with screw type clamps provided for ease and quick annealing of the welded job

Specifications

Model: MUBW-20 MUBW-25 MUBW-30 MUBW-40 MUBW-50 MUBW-60

Max. Rating (KVA): 20 25 30 40 50 60

WELDABLE MATERIAL

Mild Steel (diameter mm): 4-14 5-16 6-17 8-18 10-20 16-22

High Carbon Steel (diameter mm): 4-11 5-12 6-13 7-14 8-15 10-16

Copper (diameter mm): 4-8 5-9 6-10 7-11 8-12 10-14

Brass (diameter mm): 5-10 6-11 7-12 8-13 8-14 10-16

Aluminium (diameter mm): 5-10 6-11 7-12 8-13 8-14 10-16

Carbon Steel Blade (width mm): 30-50 30-60 35-75 -- -- --

Bimetal Blade (width mm): 20-37 25-41 30-45 35-50 35-60 40-65

Fuse (Amps): 40 50 75 100 125 150

Machine Duty Cycle: 10% 10% 10% 10% 10% 10%

Dimensions (mm): 710 x 675 x 1340

Model: MUBW-40

VIDEO OF UPSET BUTT WELDING MACHINE MODEL: MUBW-20

Rod Butt Welding Machine & Carbon Steel & Bimetal Blade Butt Welding Machine

Application:
Upset butt welding of all profiles of wires and flats of iron, steel, alloy and carbon steel, copper, aluminium, brass and other light metals and their alloys. Carbon Steel and Bimetal Blades Butt Welding

Users:
Include but not limited to wire strip and rod drawing mills, transformer motor and switch gear manufacturers, bandsaw and hacksaw blade users, small tool makers for welding mild steel shanks to alloy steel portion of taps, drills, bits, screw drivers, chisels, etc., hoop and ring manufacturers, wire forming industries, cable industries, automobile industries, air-conditioner and refrigerator makers, office equipment makers, etc.

Features:
Machines are aesthetically designed as portable models mounted as standard on a moveable stand fitted with four wheels. They are constructed for quick, easy and fool-proof operation by un-skilled worker, the welding process being automatic. Settings are simple, finely adjustable and reproducible for all variables. Uniform welds of high strength capable of withstanding subsequent drawing ensured.

Simple Settings:
1. ELECTRODE SPACING: Adjust lever on indexing plate
2. WELDING CURRENT: Operate knob of the 8 step switch, current making and breaking is automatic via a built-in electromagnetic contactor
3. UPSETTING PRESSURE: Micrometrically adjustable with pressure knob
4. CURRENT ON / OFF: Micrometrically adjustable with simple thimble

Welding Process:
Fix the above 4 simple settings, clamp the job end-to-end in the centre of the welding jaws. Release gap stopper lever from teeth, press the push button and the welding then takes place automatically. Unclamp Job. To anneal, put spacing lever to max. position. Clamp Job centrally in annealing clamps. Push the welding switch till annealing temperature is reached.

Technical Details:
TYPE: Automatic Butt Welding machine, portable model for heavy duty operation
CONSTRUCTION: A sturdy light alloy housing, well ventilated, provided with covers for accessibility to internal parts. All high voltage components housed in the body.
UPSET TRAVEL: Movable platen travel on parallel guides
UPSET PRESSURE: Provided by a precision spring action on the movable platen and micrometrically adjustable with a knob. Setting readable on a scale.
CLAMPS: Lever operated adjustable 'floating' steel clamps of precision quick acting design ensure firm preset clamping pressure. Release quick and easy.
ELECTRODES: Special wear resistant copper alloy electrodes provided with precision 'V' grooves, permit rapid and accurate alignment of wires / blades.
WELDING CURRENT ADJUSTMENT: By means of a 8 step rotary switch from 50% to 100%
ELECTRODE SPACING: Obtained with ease by a lever set against an indexing plate, adjusting in 10 steps
WELD CURRENT INITIATION: By pressing welding / annealing push button after clamping the job to weld position simply starts the automatic welding cycle
CURRENT CUT OFF: Adjustable over a wide range by means of micrometric thimble the setting of which is read on a graduated scale.
ANNEALING FACILITY: Annealing electrodes with screw type clamps provided for ease and quick annealing of the welded job ensuring a flexible zone at both ends of the weld
PORTABILITY: The machine is mounted on a four wheeled trolley type stand for easy portability

Specifications:

Model:	MRBW-15	MRBW-20	MRBW-25	MRBW-30	MRBW-40	MRBW-50	MRBW-60	MRBW-75	MRBW-100	MRBW-150
Max. Rating (KVA):	15	20	25	30	40	50	60	75	100	150
WELDABLE MATERIAL
Mild Steel (diameter mm):	3-12	4-14	5-16	6-17	8-18	10-20	16-22	18-25	19-28	20-31
High Carbon Steel (diameter mm):	3-9	4-11	5-12	6-13	7-14	8-15	10-16	12-17	12-18	13-20
Copper (diameter mm):	3-7	4-8	5-9	6-10	7-11	8-12	10-14	12-15	12-18	13-20
Brass (diameter mm):	4-9	5-10	6-11	7-12	8-13	8-14	10-16	12-17	13-19	14-22
Aluminium (diameter mm):	4-9	5-10	6-11	7-12	8-13	8-14	10-16	12-17	13-19	14-22
Carbon Steel Blade (width mm):	20-40	30-50	30-60	35-75	--	--	--	--	--	--
Bimetal Blade (width mm):	5-27	20-37	25-41	30-45	35-50	35-60	40-65	--	--	--
Fuse (Amps):	30	40	50	75	100	125	150	180	250	375
Machine Duty Cycle:	10%	10%	10%	10%	10%	10%	10%	10%	10%	10%
Dimensions (mm):	775 x 525 x 1050

VIDEO OF ROB BUTT WELDING MACHINE MODEL: MRBW-20

Rod Butt Welding Machine - Pneumatically Operated with Thyristorised Electronic Timer

Specifications:

Model:	MRBW-15P	MRBW-20P	MRBW-25P	MRBW-30P	MRBW-40P	MRBW-50P	MRBW-60P	MRBW-75P	MRBW-100P	MRBW-150P
Max. Rating (KVA):	15	20	25	30	40	50	60	75	100	150
WELDABLE MATERIAL
Mild Steel (diameter mm):	3-12	4-14	5-16	6-17	8-18	10-20	16-22	18-25	19-28	20-31
High Carbon Steel (diameter mm):	3-9	4-11	5-12	6-13	7-14	8-15	10-16	12-17	12-18	13-20
Copper (diameter mm):	3-7	4-8	5-9	6-10	7-11	8-12	10-14	12-15	12-18	13-20
Brass (diameter mm):	4-9	5-10	6-11	7-12	8-13	8-14	10-16	12-17	13-19	14-22
Aluminium (diameter mm):	4-9	5-10	6-11	7-12	8-13	8-14	10-16	12-17	13-19	14-22
Carbon Steel Blade (width mm):	20-40	30-50	30-60	35-75	--	--	--	--	--	--
Bimetal Blade (width mm):	5-27	20-37	25-41	30-45	35-50	35-60	40-65	--	--	--
Fuse (Amps):	30	40	50	75	100	125	150	180	250	375
Machine Duty Cycle:	10%	10%	10%	10%	10%	10%	10%	10%	10%	10%
Dimensions (mm):	900 x 800 x 1300	900 x 800 x 1300	950 x 850 x 1450	950 x 850 x 1450	1100 x 900 x 1500	1100 x 900 x 1500	1100 x 950 x 1500	1100 x 950 x 1500	1550 x 1050 x 1600	1550 x 1050 x 1600
Shipping Volume (m³):	1.0	1.0	1.2	1.1	1.5	1.5	1.6	1.6	2.6	2.6

VIDEO OF ROD BUTT WELDING MACHINE - PNEUMATICALLY OPERATED MODEL: MRBW-40P

Butt Welding Machines for Band Saw Blades

Welding Process:
- The Saw Blades to be joined should be cut straight, exactly at right angles and free from burrs on special shearing attachment (optional equipment)
- Welding Current, Upsetting Pressure and Upsetting Way are set according to the blade width
- The blade ends are rigidly clamped in special quick acting clamps provided on the machine
- By depressing the welding lever, the welding process begins
- The two ends are heated to forging temperatures in a few seconds and are then automatically forged (upset). The welding current switches off automatically
- The job is de-clamped and the weld completed

Process for Annealing: The upsetting way switch lever is now turned to annealing and the job is clamped again with the extended jaw distance which comes in automatically on flipping the lever to annealing position.
- By pressing the annealing switch on which two heat positions are provided, the job is annealed in order to normalize the brittleness of the welded area.
- Depending on the type of material, the annealing process should be repeated several times if need be.

Shearing Attachment (optional): Special shears with arrangement for mounting on the front of the machine are available

Grinding Attachment (optional): Grinding attachment mounted on top of the machine is necessary for removing the welding flash

Model: MBW-15B

Model: MBW-18B (with optional Auto Annealer)

Specifications:

Model:	MBW-3B	MBW-5B	MBW-12B	MBW-15B	MBW-18B
Job	Carbon Steel Band Saw Blades	Carbon Steel Band Saw Blades	Bi-Metal Band Saw Blades	Bi-Metal Band Saw Blades	Bi-Metal Band Saw Blades
Band Saw Blade Width (mm):	3 to 25	5 to 35	12 - 31	12 - 41	30 - 45
Band Saw Blade Thickness (mm):	0.6 to 1.2	0.6 to 1.2	0.8 to 1.4	0.8 to 1.4	0.8 to 1.4
Nominal Capacity (KVA):	3	5	12	15	18
Grinder (KVA):	0.12	0.12	0.25	0.25	0.25
Max. Current (Amps):	13	18	28	32	40
Duty Cycle at Max. Rating:	5%	5%	5%	5%	5%
Net / Gross Weight (kg.):	25 / 35	28 / 38	44 / 54	54 / 64	56 / 75
Dimensions (mm):	275 x 235 x 225	275 x 255 x 225	760 x 540 x 640	760 x 540 x 640	760 x 540 x 640

VIDEO OF BAND SAW BUTT WELDING MACHINE MODEL: MBW-15B with MANUAL ANNEALER

VIDEO OF BAND SAW BUTT WELDING MACHINE MODEL: MBW-15B with AUTO ANNEALER

VIDEO OF BAND SAW BUTT WELDING MACHINE MODEL: MBW-18B with AUTO ANNEALER

Model: MBW-3B (with optional Shearing & Grinding Attachments)

Model: MBW-12B

Model: MBW-15B

Standalone Abrasive Cutter

Optional Accessories:

1. Automatic Annealing Attachment (in lieu of manual annealing)
Available for MBW-12B, MBW-15B and MBW-18B

2. Shearing Attachment: For cutting the Band Saw Blades at 90^o
Special shear with arrangement for mounting on the front of the machine available for MBW-3B and MBW-5B.
Standalone Abrasive Cutter available for MBW-12B, MBW-15B and MBW-18B

3. Grinding Attachment: For removing the welding flash
Grinding Attachment mounted on top of the machine available for MBW-3B and MBW-5B.
Standalone Grinding Attachment available for MBW-12B, MBW-15B and MBW-18B

Standalone Grinding Attachment

Upset Butt Welding Machines for Band Saw Blades

Application:
- Suitable for upset butt welding of Carbon Steel and BiMetal Blades

Features:
- Upset Travel - Movable platen travel on two parallel guides
- Upset Pressure - Provided by a precision spring action on the movable platen
- Clamps - Lever operated adjustable 'floating' steel clamps of precision quick acting design ensure firm preset clamping pressure. Release quick and easy.
- Electrodes - Special wear resistant copper alloy electrodes provided
- Adjustment of welding current by means of a 8 step rotary switch from 50% to 100%
- Electrode Spacing - Obtained with ease by a lever set against an indexing plate, adjusting in 10 steps
- Annealing Facility - Separate annealing electrodes with screw type clamps provided for ease & quick annealing of welded job

Specifications:

Model:	MUBW-20B	MUBW-25B	MUBW-30B	MUBW-40B	MUBW-50B	MUBW-60B
Max. Rating (KVA):	20	25	30	40	50	60
WELDABLE MATERIAL
Carbon Steel Blade (width mm):	30-60	30-65	35-75	--	--	--
Bimetal Blade (width mm):	20-37	25-41	30-45	35-50	35-60	40-65
Fuse (Amps):	40	50	75	100	125	150
Machine Duty Cycle:	10%	10%	10%	10%	10%	10%
Dimensions (mm):	775 x 525 x 1050	775 x 525 x 1050	775 x 525 x 1050	775 x 525 x 1050	775 x 525 x 1050	775 x 525 x 1050

VIDEO OF BAND SAW BLADE UPSET BUTT WELDING MACHINE MODEL: MUBW-30B

Standalone Abrasive Cutter

Optional Accessories:

Shearing Attachment: Standalone Abrasive Cutter for cutting the Band Saw Blades at 90^o

Grinding Attachment: Standalone Grinding Attachment for removing the welding flash

Standalone Grinding Attachment

Flash Butt Welding Machines - Pneumatically Operated - for Band Saw Blades

Application:
- Suitable for upset butt welding of Bi-Metal Blades

Features:
- Electric Resistance Butt Welding is a modern method which gives a joint strength higher than the base metal strength.
- It is quick and automatic method of welding which eliminates human error and gives a perfect and strong joint

Easy Operation:
- The welding machine is designed to facilitate reliable and easy operation even by unskilled workers
- It is suitable for industrial conditions and will give a long lasting dependable service
- Clearly arranged simple levers ensure easy operation even for unskilled workers
- Clamping arrangement by quick action clamps ensure alignment is automatic and perfect

Welding Process:
- The Saw Blades are cut straight, exactly at right angles and free of burrs, using our optional shearing attachment.
- Welding current, upsetting pressure and upsetting way are set according to the blade width.
- Blade ends are rigidly clamped by special quick acting clamps provided on the machine.
- By depressing the welding lever, the automatic welding cycle begins.
- The two ends are heated up to forging temperature in a few seconds and then automatically forged (upset).
- At this instant, the welding current switches off automatically.
- The job is de-clamped and the weld completed.

Annealing Process:
- After welding, the upsetting way switch lever is turned to annealing and the job is again clamped securely with extended jaw distance which comes in automatically flipping the lever to annealing position.
- By pressing the annealing switch on which two heat positions are provided, the job is annealed, to normalize the brittleness in the welding zone.
- Depending on the type of material, the annealing process must be repeated several times if need be.

Precision Welding:
- Minute precision control is ensured by the use of latest control devices.
- The movable jaws run on precision ball type guides, which reduce friction to almost nothing and ensure utmost welding accuracy.

Specifications:

Model:	MFBW-30	MFBW-40
Max. Rating (KVA):	30 KVA	40 KVA
WELDING CAPACITY:
Width of Bimetal Blade:	27 - 54 mm	41 - 65 mm
Thickness of Bimetal Blade:	0.9 - 1.6 mm	0.8 - 1.4 mm
Input Current:	75 Amps	100 Amps
Duty Cycle:	10%	10%
Net / Gross Weight:	150 / 250 kg	150 / 250 kg
Dimensions:	1650 x 975 x 1500 mm	1650 x 975 x 1500 mm

VIDEO OF BAND SAW BLADE FLASH BUTT WELDING MACHINE MODEL: MFBW-40

Standalone Abrasive Cutter

Optional Accessories:

Shearing Attachment: Standalone Abrasive Cutter for cutting the Band Saw Blades at 90^o

Grinding Attachment: Standalone Grinding Attachment for removing the welding flash

Standalone Grinding Attachment

Band Saw Blades

- Rolls of Carbon Steel Band Saw Blades for cutting wood, plastics and low alloy steels

- Rolls of Bimetal Band Saw Blades for cutting steel

Carbon Steel Band Saw Blades:
Suitable for general purpose cutting. Hard teeth and FLEXIBLE back ensure long cutting life on wood, plastics and low alloy steels

Width x Thickness	Standard Tooth Teeth per Inch (per 25 mm)	Hook Tooth Teeth per Inch (per 25 mm)
6.0 x 0.63 mm (1/4" x 0.025")	10, 14, 18, 24	4, 6
10.0 x 0.63 mm (3/8" x 0.025")	4, 6, 8, 10, 14, 18, 24	3, 4, 6
12.5 x 0.63 mm (1/2" x 0.025")	6, 8, 10, 14, 18, 24	3, 4, 6
16.0 x 0.80 mm (5/8" x 0.032")	6, 8, 10, 14, 18	3, 4, 6
20.0 x 0.80 mm (3/4" x 0.032")	6, 8, 10, 14, 18	3, 4, 6
25.0 x 0.90 mm (1" x 0.035")	4, 6, 8, 10, 14	2, 3, 4, 6

Carbon Steel Band Saw Blades:
Suitable for general purpose cutting. Hard teeth and HARD back ensure increased feed pressure and cutting rates.

Width x Thickness	Standard Tooth Teeth per Inch (per 25 mm)	Hook Tooth Teeth per Inch (per 25 mm)
6.0 x 0.63 mm (1/4" x 0.025")	8, 10, 14, 18, 24	4, 6
10.0 x 0.63 mm (3/8" x 0.025")	8, 10, 14, 18	3, 4, 6
12.5 x 0.63 mm (1/2" x 0.025")	6, 8, 10, 14, 18, 24	3, 4, 6
16.0 x 0.80 mm (5/8" x 0.032")	10, 14, 18	4
20.0 x 0.80 mm (3/4" x 0.032")	6, 8, 10, 14, 18	3, 6
25.0 x 0.90 mm (1" x 0.035")	6, 8, 10, 14	2, 3, 4

Bimetal Band Saw Blades:
Made from HSS M42 (8% cobalt) edge material, suitable for Mild Steel, EN Series, Alloy Steels, High Carbon Steels, Structural Steels, Tool Steel cutting large profiles and solids (up to 35 HRC)

Width x Thickness	Constant TPI	Variable TPI
13 x 0.60 mm	10, 14, 18, 24	8/12, 10/14
13 x 0.90 mm	10, 14, 18, 24	6/10, 8/12, 10/14
20 x 0.90 mm	6, 10, 14	4/6, 5/8, 6/10, 8/12, 10/14
27 x 0.90 mm	6, 10, 14	4/6, 5/8, 6/10, 8/12, 10/14
34 x 1.10 mm	4, 6, 8	3/4, 4/6, 6/10, 8/12, 5/8
41 x 1.30 mm	4, 6	3/4, 4/6, 8/12, 5/8

Bimetal Band Saw Blades:
Made from HSS M51 (10% cobalt) edge material, suitable for Stainless Steel, Deep Drawing Steel, Machining Steel, Quenched and Tempered Steel, Case Hardened Steel, Spring Steel, Alloy Steel, Hot work Steel, Nitriding Steel, Cold work Steel, High Speed Steel, Cast Iron Steel, Rust and Heat Resistant Steel and Hardened material (up to 45 HRC)

Width x Thickness	Constant TPI	Variable TPI
27 x 0.90 mm	--	2/3, 3/4, 4/6
34 x 1.10 mm	--	2/3, 3/4, 4/6
41 x 1.30 mm	--	2/3, 3/4
54 x 1.60 mm	--	2/3
67 x 1.60 mm	--	1.4/2, 2/3, 3/4, 0.75/1.25, 0.75/1.10
80 x 1.60 mm	--	1.4/2, 2/3, 3/4, 0.75/1.25, 0.75/1.10

Maneklal Global Exports
67 7 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

TO OUR PAGE ON WELDING MACHINE