Change Language to English

Features:
- Electrodes, Electrode Holders and Arms water cooled. Water should be free from residue forming impurities and at a temperature below 30^oC. (If water temperature is higher, increased water flow required)
- One Pair Morse Taper 2 straight electrodes supplied as standard with the machine. (Other types available on request)
- Pressure on the Job obtained by means of heavy spring on the pressure rod at the back of the machine 
- Adjustment of Electrode Force by means of a calibrated nut. Force is adjustable and gives a constant force from 100 - 200 kgf. with 30 kgf. applied on the foot pedal.
- Adjustment of Electrode Stroke by vertical adjustment of the lower electrode holder
- Current Control by means of 6 tap change links between 50% and 100%
- Weld Initiation by means of mechanically coupled switch which initiates the weld only after preset pressure is built
- Solid State Electronic Timer and Heavy Duty Electromagnetic Contactor provided as standard equipment with the machine
- Timings: Short Range 5 - 50 cycles. Long Range 1 - 10 seconds (50 to 500 cycles)

Applications:
- Spot Welding, Electro-Brazing, Cross Wire Welding, Resistance Heating and Soldering
- Capable of Welding Stainless Steel, Brass, Phosphor, Bronze, Alloy Steels, etc.

Especificaciones:

Features:
- Electrodes, Electrode Holders and Arms water cooled. Water should be free from residue forming impurities and at a temperature below 30^oC. (If water temperature is higher, increased water flow required)
- One Pair Morse Taper 2 straight electrodes supplied as standard with the machine. (Other types available on request)
- Adjustment of Electrode Force by means of Air Pressure. Force is adjustable and gives a constant force from 100 - 200 kgf. by Pneumatic Cylinder, adjusted by Regulating Valve.
- Adjustment of Electrode Stroke by vertical adjustment of electrode holder
- Current Control by means of 6 tap change links between 50% and 100%
- Weld Initiation by means of Foot Switch which initiates the weld only after preset pressure is built
- Two Timers provided for squeeze and weld. Timings: Short Range 5 - 50 cycles. Long Range 1 - 10 seconds (50 to 500 cycles)

Applications:
- Spot Welding, Electro-Brazing, Cross Wire Welding, Resistance Heating and Soldering
- Capable of Welding Stainless Steel, Brass, Phosphor, Bronze, Alloy Steels, etc.

Especificaciones:

VIDEO DE LA MAQUINA SOLDADORA POR PUNTOS MODELO: MSP-25P

Features:
Construction: Heavily fabricated with streamline appearance, suitably stiffened at points of stress. Transformer mounted directly on to the body and bearings for the arm provided in the same.
Cooling System: Electrodes, Electrode Holders water cooled. Water should be free from residue forming impurities and at a temperature below 30^oC. (If water temperature is higher, increased water flow required).
Electrodes: One Pair Morse Taper 2 straight electrodes supplied as standard with the machine. (Other types available on request)
Adjustment of Electrode Force: By means of Air Pressure. Force is adjustable and gives a constant force from 1 to 5 kg cm2 by pneumatic cylinder, adjusted by regulating valve.
Adjustment of Electrode Stroke: By vertical adjustment of Electrode Holder.
Current Control: By means of 6 tap change links between 50% and 100%
Weld Initiation: By means of foot switch which initiates the weld only after preset pressure is built up
Electronic Control: (A) Thyristorised synchronous electronic sequence timer consisting of: Squeeze, weld, forge, off and heat control unit range 1-99 c/s
(B) Solid State - three timers provided for Squeeze, weld and forge timings - short range 5 - 50 cycles - long range 1 - 10 seconds (50 to 500 cycles)

Applications:
- Spot / Projection Welding, Electro-Brazing, Cross Wire Welding, Resistance Heating and Soldering.
- Capable of Welding Stainless Steel, Brass, Phosphor, Bronze, Alloy Steels, etc.

Especificaciones:

Features:
- Air Cooled Resistance Welding Transformer
- 4 sequence timers provided for squeeze, weld, forge and off or repeat operations
- Current Control by Transformer Taps. Welding Transformer primary winding provided with taps to allow adjustment of welding current in 6 steps from 55% to 100%
- Weld Initiation by means of Foot Switch connected to low voltage safe initiating circuit
- Upper electrode actuated via a quick follow through device by a heavy duty two-way pneumatic cylinder, controlled by a electrically operated 4-way solenoid valve. Compressed air at 15 to 80 psi (1.06 - 5.62 kgs/cm²)  acting on the pneumatic cylinder provides the necessary electrode force.
- Machine provided with air filter, air lubricator, air pressure regulating valve with gauge throttle valve to prevent the initial impact on electrode closing and all internal air connections 
- Adjustment of Electrode Force by air pressure regulating valve provided
- Adjustment of electrode stroke by vertical adjustment of electrode holders 

Applications:
- Most suitable for making precision spot or projection welds on components requiring short duration high current pulses, such as in welding of silver contacts to brass, Tungsten contacts to steel, Phosphor Bronze to M.S., Spring Steel to M.S., Copper Lead to Aluminium Foils, Copper Lead to Brass Tags, Bi-Metal (S.S. - Brass Copper) etc.

Especificaciones:

Features:
- Current Control by means of 3 primary and 3 secondary taps on the transformer to provide welding current adjustment in 9 steps. Primary Taps (High / Low / Medium) manipulated by a heavy duty snap action rotary switch
- Weld Pressure provided by a sensitive spring carried on the welding head and regulated by a finely threaded large nut from 2 to 80 lbs. Only a fraction of the actual electrode force required on the padel due to the lever arrangement provided. 
- Weld Initiation by means of a Switch which initiates the weld only after preset pressure is built
- Specially designed low leakage reactance, air cooled transformer having specially insulated coils
- Solid State Electronic Timer provided. Timings: Short Range 5 - 50 cycles. Long Range 1 - 10 seconds (50 to 500 cycles)

Applications:
- Specially designed for precision welding work as encountered in manufacture of Vacuum Tubes, Instruments, Dentures, Fountain Pen Nibs, Artificial Jewelry, Spectacle Frames, Bulb Filaments, etc.
- A versatile machine capable of tackling delicate welds and also M.S. rods up to 12 SWG
- Capable of Welding Stainless Steel, Brass, Phosphor, Bronze, Alloy Steels, etc.

Especificaciones:

*TPW - Thermally Permissible Welds (Soldaduras posible Térmicamente)

Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Telf.: +9122-22041340 / 41 / 42
Para hablar en español llame al: +9122-22041390
WhatsApp: +918652695030
e-mail: ventas@maneklalexports.com / MaquinariaManek@gmail.com / Formulario de Consulta

A NUESTRA PAGINA SOBRE MAQUINAS SOLDADORAS