|
|
| Metal Slotting Cutters |  |
Shank Type Milling Cutters |
| Rotary Form Relieved Cutters | Reamers | |
| Bore Type Milling Cutters |
| - In the
manufacture of these tools, we follow the latest British and Indian
Standard Specifications - Tools as per American, German, Russian and International Standards & also tools of non-standard and near-standard type with special tolerances can be supplied - Our tools are manufactured from the finest tool steels - The bore of Bore Type Milling Cutters will be 1" (or as per standard specifications) unless otherwise specified |
 Metal Slitting Saws (in Standard Teeth & Fine Teeth Varieties) Diameter 3" to 8" / 40 to 200 mm |
 Screw Slotting Cutters (72 Teeth) Diameter 2 3/4" to 3" |
 Slotting Cutters Diameter 2 1/2" to 6" / 50 to 125 mm |
 Cylindrical Cutters Diameter 2 1/2" to 4" / 40 to 100 mm |
 D. P. Cutters (Involute Gear Cutters) 50 to 26 D.P. (even only) 25 to 3 D.P. (all D.P.s) |
 Module Cutters 1 to 8 Module |
 C. P. Cutters 1/8" to 3/4" C. P. |
 Tap Fluting Cutters For Tap Diameter 1/8" to 2" |
 Reamer Fluting Cutters For Reamer Diameter 1/8" to 4" |
 Drill Fluting Cutters For Drill Diameter 1/16" to 1" |
 Rotary Form Cutters For Roller Chain Wheels Pitch 0.250" to 1.000" |
 Side and Face Cutters (Straight Teeth) Diameter 2 1/2" to 10" / 50 to 250 mm |
 Side and Face Cutters (Staggered Teeth) Diameter 2 1/2" to 10" / 50 to 250 mm |
 Single Angle Cutters Diameter 2 3/4" to 3" / 50 to 100 mm |
 Double Unequal Angle Cutters Diameter 2 3/4" to 3" / 50 to 100 mm |
 Double Equal Angle Cutters Diameter 2 3/4" to 3" / 50 to 100 mm |
 Shell End Single Angle Cutters Diameter 40 to 125 mm |
 Convex Cutters Diameter 2 1/4" to 4 1/4" / 50 to 125 mm |
 Concave Cutters Diameter 2 1/4" to 4 1/4" / 50 to 125 mm |
 Single Corner Rounding Cutters Diameter 2 1/4" to 3 3/4" / 50 to 125 mm |
 Double Corner Rounding Cutters Diameter 2 1/4" to 3 3/4" |
 Shell End Mills Diameter 1 1/4" to 6" / 40 to 160 mm |
 Face Cutters Diameter 1 3/4" to 6" |
 T-Slot Cutters with Taper Shank Diameter 37/64" to 2 3/4" / 18 to 72mm |
 T-Slot Cutters with Parallel Shank Diameter 18 to 60 mm |
 Dovetail Milling Cutters Diameter 1/2" to 2" / 12 to 50 mm |
 Cutters for Woodruff Keyseats Diameter 0.505" to 1.505" / 7.5 to 45.5 mm |
 Parallel Shank End Mills Diameter 1/8" to 2" / 3 to 50 mm |
 Long Series Parallel Shank End Mills Diameter 6 to 28 mm |
  Taper Shank End Mills Diameter 5/32" to 2" / 4 to 50 mm |
 Parallel Shank Slot Drills Diameter 5/32" to 1 5/8" / 4 to 40 mm |
 Taper Shank Slot Drills Diameter 7/32" to 1 5/8" / 6 to 40 mm |
 Countersinks with Taper Shank Diameter 1/2" to 3" |
 Parallel Hand Reamer |
 Parallel Machine Reamer Taper Shank |
 Machine Jig Reamer |
 Chucking Reamer with Parallel Shank |
 Chucking Reamer with Taper Shank |
 Shell Reamer |
 Hand Taper Pin Reamer |
 Machine Taper Pin Reamer |
 Machine Bridge Reamer |
 Counter Bore |
 Countersink with Parallel Shank |
 Countersink with Taper Shank |
 Centre Reamer |
 Parallel / Taper Shank Socket Reamer |
 Hole Mill |
|
|
Maneklal
Global Exports |
 |
|
TO OUR PAGE ON MACHINE TOOLS |
|
