Pipe / Tube Straightening Machines

Cambia Idioma a Español

FEATURES:

- Machines comprise of six / ten work rolls arranged in pairs
- Rolls quickly and easily adjustable angularly to give perfect contact between the tube and the roll, over the maximum effective roll profile
- Simple setting of the machine for different sizes of tubes
- All rolls driven by two identical electric motors 
- Machines fitted with indicators for vertical and angular setting of rolls
- Machines available in Single Speed and Variable Speed Options


To obtain best results from the machine, correctly designed inlet and outlet through are essential because the tube rotates at high speed and must be controlled before and after straightening.


Model: SE-33 with 6 Rolls

Model: SE-35 with 6 Rolls

ROLLS: Made from Alloy Steel, Hardened, Hyperbolic Profile Ground and Lapped. Hyperbolic Profiles designed to accept wide range of tube diameters

ROLL CARRIERS: Designed to give maximum Roll Stability even when fully extended

MAIN DRIVE: Drive to the rolls by two totally enclosed gear boxes, each having three/five output shafts, connected by universal joints. Bottom rolls and Upper Rolls driven independently. Gears are single helical made from Alloy Steel, hardened & ground. Motors connected to the input shaft of the gear boxes by flexible coupling / ‘V’ belts

ENTRY GUIDES: Entry guides made from Special Elastomer provided for the entire range

GUARDS: Perspex transparent screen guard provided in front of the rolls.

CONTROL PANEL: A control panel housing all electrical controls for running the machine provided.

Model: SE-15 with 10 Rolls and Optional: Counters for Up & Down Adjustment


Model: SE-15 with 10 Rolls and Optional: Counters for Up & Down Adjustment
Specifications:
Model  SE-10  SE-15  SE-20  SE-25  SE-31  SE-32  SE-33  SE-36  SE-40
Normal Capacity Range (Tube OD) (mm):  1.5 - 8  3 - 13  4.5 - 16  6 - 25  8 - 40  13 - 65  20 - 100  25 - 125  30 - 150
Max. Wall Thickness (mm):  1.5  2.5  2.5  3.2  4.5  6  8  8.5  9.5
Number of Rolls: 6 or 10 6 or 10 6 or 10 6 or 10 6 or 10 6 or 10 6 or 10 6 or 10 6 or 10
Straightness Achievable on 6 roll machine: 1:1000 or better 1:1000 or better 1:1000 or better 1:1000 or better 1:1000 or better 1:1000 or better 1:1000 or better 1:1000 or better 1:1000 or better
Straightness Achievable on 10 roll machine: 1:3000 1:3000 1:3000 1:3000 1:3000 1:3000 1:3000 1:3000 1:3000
Max. Diameter Admitted (mm):  8  13  20  32  45  75  115  140  165
Max. Wall Thickness at Max. Diameter (mm):  1.5  2.5  2  2.5  3.5  4.5  6.5  6.5  7
Operating Speed on Single Speed M/c (m/min):   18  36  36 30 30 30 30 30 30
Operating Speed on Variable Speed M/c (m/min): 0 - 18 0 - 36 0 - 36 0 - 30 0 - 30 0 - 30 0 - 30 0 - 30 0 - 30

Note: Capacities listed above are based on material having a yield strength not exceeding 32 kg/mm2 and are for general guidance only.
- Machine with capacity in excess of those specified above available on request


Model: SE-36 with 6 Rolls
Model: SE-40 with 6 Rolls


Control Panel


Control Panel


Model: SE-10 with 10 Rolls


VIDEO OF TUBE STRAIGHTENING MACHINE: SE-15 with Optional Counters for Up & Down Adjustment

VIDEO OF TUBE STRAIGHTENING MACHINE: SE-40

VIDEO OF TUBE STRAIGHTENING MACHINE: SE-36

VIDEO OF TUBE STRAIGHTENING MACHINE: SE-33

VIDEO OF TUBE STRAIGHTENING MACHINE: SE-35

VIDEO OF TUBE STRAIGHTENING MACHINE: SE-15

VIDEO OF TUBE STRAIGHTENING MACHINE: SE-10

Entry Guides supplied with the Tube Straightening machines


Model: SE-15 with 10 Rolls
Model: SE-20 with 6 Rolls


Model: SE-31 with 6 Rolls

Optional Accessory: Inlet Cross Roll Feeder
 

SPARE SET OF ROLLS FOR TUBE STRAIGHTENING MACHINE: We can supply Hyperbolic Profile Straightening Rolls for any make / brand of Tube Straightening Machines

Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

 Home   Top

TO OUR PAGE ON MACHINE TOOLS

Back     Next