Drilling Machines

Cambia Idioma a Espaņol
Pillar Drilling Machines Radial Drilling Machines Gang Drill Machines Pillar Drilling Cum Milling Machines
Pillar Drilling Machines

Top

Model: SI-A/2
Model: SI-40/1
Model: SMA-1
Model: SEW/S-25
Model: SI-4
         
Model: SI-A/2 SI-40/1
Type: Belt Driven with Automatic Feed Geared with Automatic Feed
Drilling Capacity (mm): 40 40
Spindle Nose: MT-4 MT-4
Spindle Travel (mm): 215 215
Number of Spindle Speeds: 8 8
Range of Spindle Speeds (RPM): 75 - 2070 90 - 1000
Number of Power Feeds: 2 2
Range of Power Feed (mm / rev.): 0.08 - 0.04 0.08 - 0.04
Distance from Column to Spindle Centre (mm): 305 305
Distance from Spindle to Base (mm): 1040 1040
Distance from Spindle to Table (mm): 515 515
Column Diameter (mm): 130 130
Base Size (machined area) (mm): 490 x 470 490 x 470
Table Size (mm): 435 x 435 435 x 435
Drilling Motor (HP): 1.5 1.75 / 2.5 (2 Speed)
Net / Gross weight (Kgs.): 400 / 500 500 / 600
Shipping Dimensions (mm): 1140 x 650 x 1950 925 x 650 x 2330
Shipping Volume (m3): 1.45 1.40
 
Model: SMA-1 SEW/P-4 SEW/P-5
Type: Belt Driven with Manual Feed Belt Driven with Manual Feed Belt Driven with Manual Feed
Drilling Capacity (mm): 13 19 19
Spindle Nose: Solid Spindle MT-2 MT-2
Spindle Travel (mm): 75 125 125
Number of Spindle Speeds: 4 8 8
Range of Spindle Speeds (RPM): 500 - 2825 87 - 3200 87 - 3200
Distance from Column to Spindle Centre (mm): 156 200 200
Distance Spindle to Base (mm): 540 925 640
Distance Spindle to Table (mm): 300 500 / 700 210 / 405
Column Diameter (mm): 47 74.35 74.35
Base Size (Machined area) (mm): 350 x 225 260 x 235 260 x 235
Table Size (mm): 205 x 205 260 x 260 260 x 260
Drilling Motor (HP): 0.5 0.5 0.5
Net / Gross weight (Kgs.): 50 / 75 90 / 110 80 / 100
Shipping Dimensions (mm): 700 x 400 x 1300 700 x 400 x 1600 700 x 400 x 1300
Shipping Volume (m3): 0.40 0.45 0.40
 
Model: SEW/S-25 SEW/S-25x380 SI-3 SI-4
Type: Belt Driven with Manual Feed Belt Driven with Manual Feed Belt Driven with Manual Feed Belt Driven with Manual Feed
Drilling Capacity (mm): 25 25 40 32
Spindle Nose: MT-3 MT-3 MT-4 MT-3
Spindle Travel (mm): 185 250 215 170
Number of Spindle Speeds: 8 8 8 8
Range of Spindle Speeds (RPM): 73 - 1800 73 - 1800 75 - 2070 75 - 2070
Distance from Column to Spindle Centre (mm): 255 380 305 280
Distance Spindle to Base (mm): 1050 980 1040 1045
Distance Spindle to Table (mm): 650 570 515 625
Column Diameter (mm): 87.60 90 130 114
Base Size (Machined area) (mm): 350 x 325 465 x 370 490 x 470 390 x 390
Table Size (mm): 345 x 345 395 x 395 435 x 435 390 x 390
Drilling Motor (HP): 1 1 1.5 1.5
Net / Gross weight (Kgs.): 190 / 235 215 / 250 300 / 400 250 / 310
Shipping Dimensions (mm): 950 x 500 x 1525 1100 x 500 x 1525 1140 x 650 x 1950 1050 x 600 x 1900
Shipping Volume (m3): 0.75 0.85 1.45 1.20

Standard Accessories:   Electric motor, starter, Drill Chuck and Arbor.

Radial Drilling Machines

Top

Model: SER-25
Model: SER-35
Model: SER-50
Model: SER-25 SER-35 SER-50
Type: Universal Belt Driven Belt Driven Geared
Drilling Capacity: 25 mm 36 mm 60 mm (in Cast Iron) / 50 mm (in Mild Steel)
Spindle Nose: MT-3 MT-4 MT-5
Spindle Stroke (mm): 200 200 300
Number of Spindle Speeds: 8 8 8
Range of Spindle Speeds (RPM): 80 - 1800 73 - 1800 30 - 1300
Spindle Drive Motor (HP): 1.0 1.5 3.0
Arm Elevator Motor (HP): 0.5 0.5 1.5
Spindle Drive V-Belt: B-45 B-45 --
Arm Elevator V-Belt: A-19 A-24 --
Working Table (L x M x W) (mm): 250 x 200 x 200 300 x 260 x 260 600 x 500 x 500
Drilling Radius (Max / Min) (mm): 720 / 365 820 / 320 1325 / 445
Distance from Column to Spindle (mm): Max: 655 / Min: 300 Max: 745 / Min: 250 Max: 1200 / Min: 320
Maximum Drill Head Travel (mm): 355 495 880
Distance from Spindle to Base (mm): Max: 880 / Min: 175 Max: 1040 / Min: 250 Max: 1210 / Min: 400
Column Diameter (mm): 130 157 255
Swivel of Arm L / R side: 90o 90o 90o
Base Plate Size (L x W x H) (mm): 1005 x 605 x 125 1255 x 675 x 135 1750 x 950 x 220
Working Surface (mm): 490 x 620 740 x 550 1220 x 770
No. of Slots / Size: 3 / 16 mm 3 / 16 mm 4 / 16 mm
Net / Gross weight (Kgs.): 1500 / 1800 1700 / 2000 2500 / 3000
Shipping Dimensions (mm): 1.1 x 0.7 x 1.8 1.3 x 0.75 x 2.1 2.0 x 1.1 x 2.6
Shipping Volume (m3): 1.5 2.2 6.0
Standard Accessories: Electric motors, R&F Switch, Box Table, Drill Chuck and Arbor, Coolant Pump.

Top

Model: SMT-40/1200
Model: SMT-40/1000
Model: SMTR-2
Model: SMT-40/1200 SMT-40/1000 SMTR-2
Type: All Geared All Geared Universal Belt Driven
Drilling Capacity: 40 mm 40 mm 38 mm
Spindle Nose: MT-4 MT-4 MT-4
Spindle Travel: 210 mm 175 mm 220 mm
Number of Spindle Speeds: 8 8 8
Range of Spindle Speeds (RPM): 90 - 1000 90 - 1000 62 - 1980
Number of Power Feeds: 2 2 2
Range of Power Feed (mm / rev.): 0.20 - 0.10 0.20 - 0.10 0.08 - 0.04
Drilling Radius (Max / Min): 1305 / 485 mm 1125 / 505 mm 895 / 440 mm
Distance from Column to Spindle Centre (Max / Min): 1200 / 380 mm 1020 / 400 mm 810 / 360 mm
Distance from Spindle to Base (Max / Min): 1180 / 500 mm 1180 / 380 mm 930 / 230 mm
Column Diameter: 220 mm 210 mm 165 mm
Vertical Power movement of arm: 750 mm 800 mm --
Horizontal movement of Drilling Head: 630 mm 635 mm --
Maximum Drill Head Travel: -- -- 450 mm
Swivel of Arm L / R side: -- -- 90o
Box Table Size (L x W x H) (mm): 510 x 380 x 355 510 x 380 x 355 380 x 300 x 300
Base Plate (L x W x H) (mm): 1800 x 900 x 180 1625 x 850 x 180 1250 x 760 x 150
Working Surface: 1020 x 650 mm 1010 x 690 mm 820 x 610 mm
‘T’ Slot number / size: 4 / 16 mm 3 / 16 mm 4 / 16 mm
Drilling Motor: 2 HP (1400 / 2800 rpm) 2 HP (1400 / 2800 rpm) 1.5 HP
Elevating motor for arm: 1 HP 1 HP 0.5 HP
Net / Gross weight (Kgs.): 1700 / 2000 1500 / 1800 1500 / 1800
Shipping Dimensions (mm): 1900 x 1000 x 2200 1750 x 1000 x 2000 1250 x 1550 x 2000
Shipping Volume (m3): 4.50 3.50 3.90

Standard Accessories: Electric motors, starter, Box Table, Drill Chuck and Arbor, Coolant Pump.

Top

Geared Heavy Duty 'ADM' Series
Model: ADM-40 ADM-50 ADM-50/HD ADM-65 ADM-75
Drilling Capacity in MS (mm): 40 50 50 65 75
Drilling Capacity in CI (mm): 50 60 60 75 85
Column Diameter (mm): 255 310 310 355 405
Drilling Radius (Min / Max) (mm): 375 / 950 450 / 1100 425 / 1325 650 / 1600 675 / 1950
Machine height from floor (mm): 2420 2760 2760 3170 3320
Distance from Spindle Nose to top of Base Plate min. with Spindle in downward position (mm): 100 100 100 100 100
with Spindle in upward position (mm): 1150 1300 1300 1600 1750
Drilling Depth (mm): 180 225 225 325 325
Working Surface of Base Plate (mm): 885 x 545 975 x 655 1150 x 655 1460 x 845 1735 x 940
Dimensions of Base (mm): 1470 x 705 x 180 1645 x 835 x 200 1755 x 835 x 200 2370 x 1015 x 210 2640 x 1110 x 210
Dimensions of Box Table (mm): 330 x 330 x 330 550 x 400 x 400 600 x 450 x 450 600 x 450 x 450 600 x 450 x 450
Spindle Speeds Number / Range: 6 / 45 - 660 rpm 9 / 40 - 790 rpm 9 / 40 - 790 rpm 12 / 25 - 930 rpm 12 / 20 - 740
Spindle Feeds Number / Range: 3 / 0.095 - 0.215 mm/rev 3 / 0.08 - 0.18 mm/rev 3 / 0.08 - 0.18 mm/rev 6 / 0.10 - 1.25 mm/rev 6 / 0.10 - 1.25 mm/rev
Spindle Nose: MT-4 MT-5 MT-5 MT-5 MT-6
Drilling Motor (HP): 2.0 3.0 3.0 5.0 7.5
Elevating motor for arm (HP): 1.0 2.0 2.0 3.0 5.0
Net / Gross weight (Kgs.): 2000 / 2500 3000 / 3500 3200 / 3700 4800 / 5400 6500 / 7200
Approximate Shipping Volume (m3): 4.5 5.5 6.0 6.5 8.0
The 'ADM' Series machines have double Columns (inner pillar & outer sleeve). The outer sleeve is fitted on the inner pillar on a set of straight & taper roller bearings. The radial arm is mounted on this outer sleeve, giving it a free and smooth movement.

 

Standard Accessories ('ADM' Series): Electric motors, Panel board, Box Table, Coolant Pump.

Optional Accessories ('ADM' Series): Tilting / Inclinable Work Table, Hydraulic clamping (hydraulic power pack fitted inside the arm of the radial drill for locking the longitudinal, vertical and radial movement by a push button)
Optional Accessory:
Tilting / Inclinable Work Table
Gang Drill Machine

Top
Model: SEW/G-25x2
Drilling Capacity in MS (mm): 25
Column Diameter (mm): 87.6
Distance between two units (mm): 380
Centre of Spindle to Table (mm): 250
Max. Spindle to Table (mm): 350
Taper in Spindle: MT-3
Spindle Travel (mm): 185
No. of Speeds: 8
Range of Speeds (rpm): 73 to 1800
Table Size (mm): 1000 x 610
V-belt section: B-52
Motor (HP): 1.0
Net / Gross weight (Kgs.): 380 / 450
Shipping Dimensions (mm): 1200 x 750 x 1525
Approximate Shipping Volume (m3): 1.40

Standard Accessories:   Electric motor, R & F Switch, V-belts & Drift Key
Pillar Drilling Cum Milling Machines

Top
Features:

- Proportioned column for rigidity of machine
- Rough and Smooth feed available by manual and power feed
- Provision of window for change of gear on top cover
- Quill spacer made of mild steel
- Main Spindle made of EN steel with 6 slots. 8 Speeds on either direction
- All table movements are manual
- Geared Head Machines with Power Feed for Drilling Head



Model: DCM-3M
Model: DCM-3M/G
Model: DCM-6DMU
Model: DCM-6DMU/G
Model: DCM-3M DCM-3M/G DCM-6DMU DCM-6DMU/G
Type Belt Driven with Manual Feed Geared Head with Power Feed Belt Driven with Manual Feed Geared Head with Power Feed
Drilling Capacity in CI (mm): 40 40 40 40
Drilling Capacity in MS (mm): 35 35 35 35
Face Mill Capacity in CI (mm): 100 100 100 100
End Mill Capacity in CI (mm): 25 25 25 25
Tapping Capacity in CI (mm): 22 22 22 22
Column Diameter (mm): 130 130 114 114
Swing (mm): 610 610 560 560
Working Surface (mm): 435 x 200 435 x 200 725 x 224 725 x 224
Longitudinal Travel (manual) (mm): 325 325 340 340
Cross Travel (mm): 250 250 305 305
Vertical Travel (mm): 400 400 830 830
Quill Travel (mm): 220 220 170 220
Spindle Taper: MT-4 MT-4 MT-4 MT-4
Range of Spindle Speeds (rpm): 75 to 2070 90 to 1000 75 to 2070 90 to 1000
Number of Spindle Speeds: 8 8 8 8
Range of Power Feed: --  Two - 0.08 & 0.04 -- Two - 0.08 & 0.04
Distance - Spindle to Base (mm): 940 940 830 830
Base Size - machined area (mm): 490 x 470 490 x 470 -- --
Overall Height with Guard (mm): 1830 2130 1780 2130
Main Electrical Motor: 1.5 HP 2 Speed: 1.75 / 2.5 HP 1.5 HP 2 Speed: 1.75 / 2.5 HP
Shipping Dimensions (mm): 1.2 x 0.8 x 1.95 1.2 x 0.8 x 2.35 1.2 x 0.92 x 1.6 1.2 x 0.92 x 2.35
Shipping Volume (m3): 2.0 2.5 2.0 2.75

CI: Cast Iron; MS: Mild Steel
Standard Accessories: Electric motor, starter, Drill Chuck and Arbor, Drift Key, Milling Collet Adapters, Coolant Pump.
Optional Accessories: Square Working Table (for model: DCM-3M & DCM-3M/G)

Drilling: Drilling can be done by fixing a square working table (optional accessory) in place of the cross slide.

Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

 Home   Top

TO OUR PAGE ON MACHINE TOOLS

Back     Next