Universal Tool & Cutter Grinder

Cambia Idioma a Espaρol
Grinders Model: UTCG-80 / 87 / 92 Grinders Model: UTCG-255 / 270
Grinders Model: UTCG-80 / 87 / 92

Top

Features:
- A versatile machine capable of sharpening a vast range of tools like milling cutters, spiral mills, metal slitting saws, side & face cutters, reamers, taps etc. and with suitable optional attachments lathe tools, end mills, formed cutters, etc.
- Totally enclosed wheel head motor with a double ended spindle. One standard and one extended wheel adaptor can be mounted on either end. One Cup Wheel and one Dish Wheel supplied with the machine.
- Spindle runs at 2800 rpm and is controlled by a reversing switch.
- Wheel head is mounted on an engraved base plate which can swivel through 360o & can be clamped in any position.
- The Cast Iron column can be adjusted vertically by means of a hand-wheel and can be locked in any position. The movement is controlled accurately by means of a friction mounted micrometer dial.
- Upper work table has a slot for fixing tool rest etc. and also for accurate location of loose center heads. It is graduated on either side of zero setting and can swivel through 180o. Provision made for taper setting in Inches per Foot.
- Longitudinal movement of the table by a rack pinion operated by a handle or, if required, by hand pressure.
- Table located on accurately machined ‘V’ and Flat ways, fitted with adjustable stops to limit the movement of the table.
- Cross traverse accurately controlled by a hand wheel fitted with a friction mounted micrometer dial.


Specifications:
Model: UTCG-80 UTCG-87 UTCG-92
Swing over table (diameter) (mm): 230 305 350
Max. distance between centres (mm): 305 560 660
Table longitudinal traverse (mm): 305 510 610
Table cross traverse (mm): 200 205 255
Table dimensions (mm): 530 x 142 805 x 156 1015 x 156
Tee slot width (mm): 10 12 12
Centre of wheel above table (mm): 280 330 350
Table Swivel: 90o 90o 90o
Head Swivel: 360o 360o 360o
Grinding spindle speed (rpm): 2800 2800 2800
Motor (HP): 1.0 1.0 1.0
Floor Area Occupied (mm): 900 x 750 1120 x 920 1500 x 950
Height of Machine (mm): 1500 1680 1500
Net / Gross Weight (kgs): 500 / 700 800 / 1000 950 / 1200
Dimensions (m): 1.3 x 1.4 x 1.6 1.4 x 1.5 x 1.7 1.5 x 1.6 x 1.8
Shipping Volume (m3): 3.0 3.5 4.5

Standard Accessories: Set of loose centre heads complete with centre, Compound universal work support, Universal tooth rest, Tool sharpening vice, Dish grinding wheel (6” x 1.5”, 1” bore), Cup grinding wheel (4” x 2”, 1” bore), Tool kit

Optional Accessories: Hob grinding attachment, Chaser grinding attachment, Radius grinding attachment, 1/2” Drill grinding attachment, 1/2” to 1-1/2” Drill grinding attachment, Tap lead relieving attachment (with self centering chuck), Indexing attachment with 3-jaw chuck, Collet chucking attachment, Cylindrical grinding attachment



VIDEO OF OUR UNIVERSAL TOOL & CUTTER GRINDER MODEL: UTCG-87

Reamer Sharpening on Centres
Universal Cutter Head

Drill Grinding Attachment
Collet Chucking Attachment

Tap Lead Relieving Attachment (with self centering chuck)
Radius Grinding Attachment

Hob Grinding Attachment
Grinders Model: UTCG-255 / 270

Top

Features:
- Wheel Spindle made of Alloy Steel and precision ground, runs on specially selected precision pre-loaded antifriction grease-packed bearings.
- The spindle accommodates easily interchangeable arbors.
- Easy access to control elements. Double control (UTCG-255) / Triple control (UTCG-270) to Table Movements. Table runs on rollers to give positive and accurate control.
- Wheel Head Pillar of large diameter designed to dampen vibrations. Exposed portion protected against dust by telescopic bellow guards
 

Specifications:
Model: UTCG-255 UTCG-255/RB UTCG-270 UTCG-270/RB
Swing over table (dia.) (mm): 255 350 270 360
Height of centres (mm): 125 170 (125 + 45 mm Rising Block) 130 175 (130 + 45 mm Rising Block)
Admit between tailstock centres (mm): 480 480 740 740
Admit between workhead and tailstock centres (mm): 370 370 600 600
Working Area of Table (mm): 700 x 125 700 x 125 990 x 135 990 x 135
Longitudinal Movement of Table (mm): 380 380 500 500
Cross Movement of Table (mm): 200 200 230 230
Vertical Traverse of Wheelhead (mm): 270 270 270 270
Swivel of Table: 45o on either side 45o on either side 45o on either side 45o on either side
Fine Adjustment: 9o on either side 9o on either side 9o on either side 9o on either side
Swivel of Wheelhead - Horizontal Axis: 350o 350o 350o 350o
Swivel of Wheelhead - Vertical Axis (Tilting): 90o on either side 90o on either side 25o on either side 25o on either side
Least count of dial for cross and vertical traverse (mm): 0.02 0.02 0.02 0.02
Grinding spindle speed (rpm): 3400 / 5000 3400 / 5000 3400 / 5000 3400 / 5000
Max. Diameter x Width of Grinding Wheel (mm): 175 x 20 175 x 20 175 x 20 175 x 20
Motor: 0.75 HP 0.75 HP 1.00 HP 1.00 HP
Net / Gross Weight (kgs): 500 / 700 550 / 800 1000 / 1400 1000 / 1400
Dimensions (m): 1.1 x 1.3 x 1.4 1.1 x 1.3 x 1.4 1.7 x 1.3 x 1.8 1.7 x 1.3 x 1.8
Shipping Volume (m3): 2.0 2.0 4.0 4.0

Standard Accessories: Motor, Workhead, A pair of Tailstocks, Reduction Sleeves for Workhead (MT 3, 2 & 1 for UTCG-255 & MT 4, 3, 2 & 1 for UTCG-270), Wheel Dresser with Diamond, Wheel Guards, Gauge for setting Centre Height, Grinding Wheel Flanges, Set of Finger Rests, Clearance Angle Setting Device with Carrier (for left hand tailstock), set of spanners.

Optional Accessories:
1. Cylindrical grinding attachment
2. Internal grinding attachment
3. Universal 3-way machine vice with 4" Jaw
4. Radius Dressing attachment (concave or convex)
5. Three-Point Steady Rest
6. Face Mill Cutter grinding attachment
7. Gear Milling Cutter grinding attachment
8. Spiral & Hob grinding attachment
9. Radius grinding attachment
10. Long Reamer grinding attachment
11. Radial Relieving attachment for Taps, Dies and Cutters
12. Combined Axial / Radial relief grinding attachment for step drills and form cutters
13. Drill-Point grinding attachment
14. Wheelhead mounted Radius / Angular wheel-dressing attachment
15. Collet Chucking attachment
16. Collets
17. Positive indexing attachment
18. Coolant equipment with pump and splash-guard

Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

 Home   Top

TO OUR PAGE ON MACHINE TOOLS

Back     Next