Hand Lever Shearing Machines

Cambia Idioma a Espańol
Light Duty Machine Light Duty Geared Machine Geared Machine with Angle & Tee Cutting Attachments Heavy Duty Geared Machine
Rod Cutting Machine Punching Machine Combined Punching & Shearing Machines  

Model: 3/3L		 Light Duty Lever Shearing Machine

Model: 3/3R 3/4R 3/5R 3/3L
Cutting Capacity up to, in M.S. (mm)
Plate: 2 2 3 3
Flat (L x W): 40 x 3 45 x 3 50 x 4 50 x 3
Round (Diameter): 8 8 10 10
 
Approx. Length of Blade (mm): 110 150 200 300

Standard Accessories:  Cutting Blade, Handle
Extra Spares:  Extra Cutting Blades

Light Duty Geared Lever Shearing Machine


Model: 3/500
Model: 6/200 5/300 4/400 3/500 4/7R
Cutting Capacity up to, in M.S. (mm)
Plate: 3.5 4 3.5 3 4
Flat (L x W): 40 x 5 50 x 5 50 x 4 50 x 3 50 x 5
Round (Diameter): 10 12 13 13 15
Square: -- -- -- -- 15
 
Approx. Length of Blade (mm): 175 300 400 500 175

Standard Accessories:  Sheet Cutting Blade, Ring Blade Round,  Ring Blade Square, Handle
Extra Spares:  Extra Sheet Cutting Blade, Ring Blade Round,  Ring Blade Square


Model: 4/7R

Model: 8/C


NOTE:  Sections smaller then the machine capacity should not be cut. A separate section blade with plate guide for section should be purchased for every size of section		 Geared Lever Shearing Machine with Angle and Tee Cutting Attachments

Model: 8/C 8/CH 10/CH
Cutting Capacity up to, in M.S. (mm)
Plate: 6 7 8
Flat (L x W): 50 x 8 60 x 8 75 x 10
Round (Diameter): 16 18 20
Square: 16 18 20
Tee Cutting: 50 x 5 50 x 6 60 x 6
Angle Cutting (in one cut): 50 x 6 60 x 6 75 x 6
 
Approx. Length of Blade (mm): 175 175 175

Standard Accessories:  Section Blade, Plate Cutting Blade, Round Blade, Square Blade, Plate Guide for Section, Handle
Extra Spares:  Extra Section Blade, Plate Guide for Section, Plate Cutting Blade, Round Blade, Square Blade

Heavy Duty Geared Lever Shearing Machine


Model: 5S/13R
Model: 5S/13R 5S/16R
Cutting Capacity up to, in M.S. (mm)
Plate: 10 12
Flat (L x W): 100 x 12 75 x 16
Round (Diameter): 25 28
Square: 25 28
Tee cutting: 65 x 6 65 x 7
Angle cutting (in one cut) 75 x 8 90 x 8
 
Approx. Length of Blade (mm): 175 175

Standard Accessories:  Section Blade, Plate Cutting Blade, Round Blade, Square Blade, Plate Guide for Section, Handle
Extra Spares:  Extra Section Blade, Plate Guide for Section, Plate Cutting Blade, Round Blade, Square Blade


Model: 5S/13R
NOTE:  Sections smaller then the machine capacity should not be cut. A separate section blade with plate guide for section should be purchased for every size of section

Model: 50/20		 Rod Cutting Machines

Model: 50/20 50/26
Cutting Capacity up to, in M.S. (mm)
Round Bar (Diameter): 18 22
Square: 16 20

Standard Accessories:  Rod Cutting Blade, Handle
Extra Spares:  Extra Rod Cutting Blades

Punching Machine
Model: 16/10
Model: 10/6 16/10
Cutting Capacity up to, in M.S. (mm)
Round (Diameter): 10 16
Thickness of plate: 6 8
Depth of Gap: 87 150

Standard Accessories:  Set of round die and punch, set of square die and punch, Handle
Extra Spares:  Extra Sets of round die and punch, sets of square die and punch

Combined Punching and Shearing Machines


Model: 30/5R
Model: 30/5R 30/8C 30/10CH
Cutting Capacity up to, in M.S. (mm)
Plate: 3 6 8
Flat (L x W): 50 x 4 50 x 8 75 x 10
Round (Diameter): 10 16 20
Square: -- 16 20
Tee Cutting: -- 50 x 5 60 x 6
Angle Cutting (in one cut): -- 50 x 6 75 x 6
 
Approx. Length of Blade (mm): 200 175 175
Punching (Dia.) Capacity (mm): 10 12 16
Thickness of Plates (mm): 6 7 8

Model: 30/10CH
Standard Accessories:  Round Punching Die Set, Square Punching Die Set, Sheet Blades, Section Blade (with model 30/10CH), Handle
Extra Spares:  Extra Round Punching Die Set, Square Punching Die Set, Sheet Blades, Section Blade (with model 30/10CH)

NOTE:  Sections smaller then the machine capacity should not be cut. A separate section blade with plate guide for section should be purchased for every size of section

GENERAL NOTE:  
- Cutting capacity of Shears mentioned above are for prime quality Mild Steel Plates, Flats, Rounds, Squares and Sections
- Hard material having more carbon content may reduce cutting capacity and damage blades
- Spares, if required, can be supplied at additional cost
- In ratchet type shearing and rod cutting machines, the cut is made on number of strokes
- In the rod cutting machine, the cut cannot be smooth and clean, as it is made by cropping process

Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

 Home   Top

TO OUR PAGE ON MACHINE TOOLS

Back     Next